[Deltasix]

Hi,

I searched, couldn't find the answer, but what is the exact bulb used in the turn signals of a vulcan S.

I'm fairly certain the OEM number is:
Kawasaki 92069-0076 BULB,12V 10W

But is there an equivalent I can pick up at a local advanced auto or the like? Thanks.

 

[Tourer]

The part number for signal bulbs for the S is 92069-0106 and is used in front and rear for all years. See link below. Would take the bulb out and bring it down to Advance, Auto Zone, etc…. Looks like an amber 67 bulb.

2016 Kawasaki VULCAN S (EN650AGF) Turn Signals | Babbitts Kawasaki Partshouse

Shop online for OEM Turn Signals parts that fit your 2016 Kawasaki VULCAN S (EN650AGF), search all our OEM Parts or call at (231)737-4542

www.kawasakipartshouse.com

https://www.partzilla.com/product/kawasaki/92069-0076?gclid=EAIaIQobChMIy7j-rP_V8AIV7ubjBx0OVgMsEAQYASABEgK-nvD_BwE

 

[KeepRidin]

If I remember correctly the poles are 135 degrees apart instead of the usual 180.

 

[Cpt.Evil]

I had alot of trouble finding the orange ones after the right hand rear kept blowing after I did a tail tidy mod. In the end I just replaced all the indicators with LED and never had a problem since.

 

[AlwaysRollin]

I had alot of trouble finding the orange ones after the right hand rear kept blowing after I did a tail tidy mod. In the end I just replaced all the indicators with LED and never had a problem since.

was this purely plug and play or did this require any resisters or relays?

 

[Cpt.Evil]

was this purely plug and play or did this require any resisters or relays?

I swapped the flasher relay under the tank.
Rangemaster did an excellent post detailing this.

Retrofit LED Lamps for Existing Turn Signals- Turn...

One of the mods I'm doing to make more power available for accessories is changing out the existing incandescent OEM turn signal lamps with LEDs. Note I said lamps, not the turn signal fixtures. Obviously the turn signal relay had to be changed out (I used the Competition Werkes MPH-U2R) to...

www.vulcanforums.com

 

[peter6]

I got couple amber LED bulbs from amazon for my turn signals and they fit just fine. Look for 1056 or 7507 bulb. They should be the same.