Kawasaki Vulcan Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter #1
Installed them last week end and it was a bitch.

If u plan on doing this here are the tricks.

First drill the screw wholes out to about 1/2 in
These go in very tight it's hard to turn the baffle After you get it in.

Second pack the fiberglass as tight as u can get them.

After u get the top one installed it is easier if u remove the top pipe to work on the lower pipe.

They came with no instructions.
With these tips I would have saved about 2 hours.

After saying that I glad I did it. The sound is quieter at idle and highway speed
but still get that louder sound when u are on the gas.
 
1 - 1 of 1 Posts
Top