Kawasaki Vulcan Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
32 Posts
Discussion Starter #1
I bought a turn signal conversion kit for my wife's 900. I have taken the rear turn signal stems off but cannot figure out how to get the wires from the end of the stem into the signal housing. I have disassembled as far as I can without breaking something. HELP!
 

·
Premium Member
Joined
·
50 Posts
I put a LED kit in my rear that get siliconed on the lens. Tried several ways to get the wires out. No luck always cut them . In order to get assembly apart you have to take out the light socket. then you can take the stem off of the chrome housing. I ended up drilling a small hole in the bottom and runing my wires on bottom of stems. Black tape is nearly invisible on it. Good luck My wires where really small which helped.
 
1 - 3 of 3 Posts
Top