Kawasaki Vulcan Forum banner

transmisson drive sharft problem

2175 Views 7 Replies 5 Participants Last post by  madhatter4119
i have a vn 1500 classic 1997 am experiencing a shudder through the drive train when taking off in first gear rides fine through 2-3 -4 all info apreciated first tread posted
1 - 8 of 8 Posts
Are you aware that you posted a 1500 question under the 1600 model tread section, here I am wandering why I always see so few people viewing the 1600 section and I now realize some of those few are here by mistake.
i have a vn 1500 classic 1997 am experiencing a shudder through the drive train when taking off in first gear rides fine through 2-3 -4 all info apreciated first tread posted
on a 14 year old bike there should have been a couple maintenance lubes done on the shaft, do you know it any have been? The UJ will definitely benefit from grease, as will the spline shaft at the rear end.
will check drive shaft and spline thanks for the info Sunny Bob
really enjoying the forum will try not to make that error next time cheers guys
Hello.... This is the 1500 fourm
yeah i know guys am sorting the problem am totally rebuilding the bike will post pics when finished will take some time though cheers for all the info
Why not post some picture during the rebuilt...We love pictures here..
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top