T-Bag

GGB6259 said:

yup.........

Click to expand...

What model did you get? Drill out holes for the voyager's windshield?




.

racer_phill said:

What model did you get? Drill out holes for the voyager's windshield?




.

Click to expand...

Found it-
Tbags T-Bags Windshield Bag TB3200WBP

It came with a large plastic flap on the bottom and I had to cut/trim it to fit. Not hard to do... ot is about 1/4" too wide on either side but you don't notice.
pockets are velcro closure. I used double sided tape and run a dark screen. Not very noticeable...

gb

GGB6259 said:

yup.........

Click to expand...

Looks good. What do you carry in there, and what do you do with the contents when you go into a restaurant or the hotel for the night?

twowheeladdict said:

Looks good. What do you carry in there, and what do you do with the contents when you go into a restaurant or the hotel for the night?

Click to expand...

Cell phone, charger, readers and sunglasses. maybe my meds,,, nothing I cant do without if stolen. Handy for toll both change or my EZPass.

Personnally I've never had anything pilfered off a bike. I rarely lock my saddle bags or trunk. Maybe at night if I'm on the road away from home.. Does not take long so it's a non issue for me.

gb

The picture looks good with it on your dash. You had to trim the bottom, and you used double sided tape for what area if you don't mind me asking? I have the tall clear windshield that came with the bike, but was thinking of getting a shorter one for summer use.

The OEM stock shield is tall as hell and I'm just under 6'. I went with a Rifle 14" smoked. The dark tint hides the double sticky. I have two stripes across the windshield just below the plastic backer on the TBAG. You can barely see it. On a clear shield it would be visible. You might be able to extend the plastic backer on the TBag its just flexible black plastic sheet. Wife has a bunch of "cutting boards" made out of the same basic material. Just need to find black.. The TBAG backer was a tad short for the vulcan windshield holes. I said screw it and went with the tape but could have extended it easy enough...

All part of the master plan... so I'm good with it as is. Also the 14" Rifle is perfect for me... and is a solid well built windshield. Takes a few days and the bag will hold the curve and not fight back to straighten out.

You can see what you start with here- [ame]http://www.amazon.com/Tbags-T-Bags-Windshield-Bag-TB3200WBP/dp/B0022Y58JA[/ame]

gb

Thank You for the advice, I was thinking of getting the 3 pouch before Bike Week, or I will look at what the venders have in Daytona in March.