Kawasaki Vulcan Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
729 Posts
Discussion Starter #1
Could anybody with stock pipes give a shout back on dia. of the stock pipes. I.D. at the exit that is.
Have mapped out the bulk of changes made to the bike, with the extra's added on. Need a baseline to finish up when I return from work this summer.

Thanks to all members

This forum is one of the best.
 

·
Registered
Joined
·
98 Posts
3.25" i.d. once you get past the lip on the edges.
 

·
Registered
Joined
·
729 Posts
Discussion Starter #3
3.25" i.d. once you get past the lip on the edges.
Thank you LBV for the info.
I think I messed up in the discription of what I was looking for. What I am looking for is the I.D. of the exit of the spent gasses from the muffler. If I was to guess from pic's that I have seen 1 1/8" - 7/8" maybe less?
Trying to guest-a-mate flow and back pressure of stock pipes.
 

·
Registered
Joined
·
360 Posts
You want the ID of the baffle, not the overall pipe.

I stuck a calliper in there and got 1 1/16"

Thats an inch and a sixteenth. ID.
 

·
Registered
Joined
·
98 Posts
Ah, ok. Thought maybe you had debaffled but what Shadow said then.
 

·
Registered
Joined
·
729 Posts
Discussion Starter #6
Thank you "Shadow1" that is it.
I can not wait to get back this fall and finish everything up.It is something I started a couple of years back.
Again thank you Shadow1 and LBV

Ride Safe and Often
 
1 - 6 of 6 Posts
Top