Kawasaki Vulcan Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
170 Posts
Discussion Starter #1
Do you have to remove the tank to get to the spark plugs??
 

·
Registered
Joined
·
533 Posts
Take out the bolts at the rear, tilt the tank upward and prop up with a piece of 2x4. You should be able to get at them using the plug wrench in the tool kit.
 

·
Registered
Joined
·
68 Posts
Changing Plugs

This trick works great for the rear plug but have to wiggle a bit with the socket under the tank for the front plug. Use the tool kit plug socket and short extension or a short 5/8 in plug socket with swivel extension and dont' forget the anti-seize. My original plugs after 15K miles looked fine but put new NGK 3901's in anyway.
 
1 - 3 of 3 Posts
Top