Kawasaki Vulcan Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
255 Posts
Discussion Starter #1
Apologies if this has been asked before. I wanted to look at my plugs on the Classic and wonder if the cylinder head covers have to be removed first. Looking at the back cylinder cover, I don't know whose hands are small enough to get to that bolt to loosen it. Mine are not.
If I can just pull the wire and get a deep well socket down there, then all is good.
Thanks for the help.
 

·
Premium Member
Joined
·
2,115 Posts
Apologies if this has been asked before. I wanted to look at my plugs on the Classic and wonder if the cylinder head covers have to be removed first. Looking at the back cylinder cover, I don't know whose hands are small enough to get to that bolt to loosen it. Mine are not.
If I can just pull the wire and get a deep well socket down there, then all is good.
Thanks for the help.
I don't know what bolt you're talking about but bikers is right just pull the spark plug wire and in the plug. But it's sometimes difficult to pull the spark plug wire off for the first time. As you are pulling, twist the wire left and right.
 
1 - 6 of 6 Posts
Top