Kawasaki Vulcan Forum banner

Single carb update

4872 Views 2 Replies 2 Participants Last post by  honest-al
I changed the 38mm Mikuni to the rear stock carb.
The 38mm was WAY to big and ran fine but too rich. I think it came off a 2-stroke bike.
The stock carb has the stock jetting except for two washers under the needle.
I use the stock choke cable.
It was a little hard to make an idle screw adjuster but that was the only problem.
The stock carb sits in much more and is perfect for leg clearance.
This would be the way to go for those of you wanting to go to a single carb!
Performance is excellent and I think that fuel mileage is a little better.
1 - 3 of 3 Posts
Stock Carb? From what bike? Thanks.
Stock meaning the rear carb that came with the bike.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.