Kawasaki Vulcan Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
11 Posts
i am not sure on the size of wrench but i will say that it is alot ezer to yake the whole thing off and turn it and then put it back on.
 

·
Registered
Joined
·
198 Posts
JOHN
Spanners do not fit no room unless you remove shock use a punch /hammer.
Raise the rear wheel off the surface it releases the shock pressure.
Bare
The spanner wrench I mentioned will fit - no need to remove shock or use punch/hammer. Spray the shock ring nuts with penetrating oil first and let it sit for a few minutes before adjusting the rings. Raising the rear wheel off the ground will help, but I have adjusted the shock without doing so.
 
1 - 6 of 6 Posts
Top