One of you message/forum gurus tell me how to post a huge file here...I downloaded the service manual years ago from god knows where and thought it oughta get shared, but it's almost 14mb
Service Manual
1 - 7 of 7 Posts
I doubt if posting that file directly to the forum is a good idea.
This subject has come up on this forum in the past and it's a definite no-no....legal reasons.
You can always store to googledocs and share the link to people as they want it.
It's a no no to post, but for anyone interest I still have my manual I purchased from a dealer when I got my bike.
1 - 7 of 7 Posts
Join the discussion
Recommended Reading
-
Got a bad tick after oil change
Vulcan 2000So I have a 2004 VN2000 and I decided to do an oil change with some 20w50 mobil1 and a K&N filter. About 400 miles after the change, I developed a LOUD tick in the front cylinder head (I could hear it over the engine and wind noise on the highway doing 75, with full-face helmet and earplugs)...- 32
- 2K
-
Kevinv2k · updated
-
LED replacements for Tail Light and Turn Signals?
Vulcan 2000So, now that I have my VN2KLT, I'm looking to do what I did on my old VN900LT and replace the tail light and turn signals with LEDs. Is there a replacement LED board for the tail light, that uses the existing housing, and does NOT have integrated turn signals in it? Just a bunch of red LEDs...- 12
- 2K
-
asbrand · updated
-
Saddlemen Profiler Seat
Vulcan 2000So I bought a Saddlemen profiler and the directions say I need the bracket from stock passenger seat. The bike came with a mustang. I’ve looked at the parts diagram and went to local kawai dealer and can’t get just the bracket. Saddlemen isn’t being much help either. Internet searches haven’t...- 13
- 649
-
Winter again
Vulcan 2000Having my morning coffee in a snowstorm.....trying really hard to remember why I moved out here lol! I had my V2K out yesterday in the cold for about 8 hours. Fired it up to bring it back into the garage after moving all my saws (woodworking project) and it started to "clack" on the low left...- 22
- 567
-
DANAD · updated
-
OEM Kawasaki Parts
Vulcan 2000I have seen a bunch of threads of people looking for specific OEM parts. Just wanted to post this link of where I have purchased parts in the past. https://www.kawasakipartshouse.com/oemparts/c/kawasaki_motorcycle/parts Hope it helps.:serious::frown2::surprise::wink2::grin2:- 0
- 100
-
MotionlessMerc · updated
Join now to ask and comment!