Kawasaki Vulcan Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1,159 Posts
Lift the back end (the seat end) slightly, then push it forward while wiggling side to side. There are two prongs at the front holding it in place that will let go with a little pressure.
 

·
Registered
Joined
·
35 Posts
Discussion Starter · #4 ·
Lift the back end (the seat end) slightly, then push it forward while wiggling side to side. There are two prongs at the front holding it in place that will let go with a little pressure.
Thank you that worked! I kept lifting upward and didn't try pushing forward.

Tadah!
 

Attachments

1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top