Kawasaki Vulcan Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
574 Posts
Discussion Starter #1
I had my lower and upper windshields off my new Nomad installing some aluminum spacers on the tree mount bar, to rotate the shield forward some.

I'm installing both upper and lower shields back on and I figured the upper shield brace went on top of the lower shield so I could see the adjustment marks.

But it almost looks like the lowers don't fit over the upper brace that way.

I can't remember which way I took them off. Anybody know this ?

(Keep in mind I'm not talking about the extra reaming I had to do to elongate the lower hole in the lower brace. I talking about which fits on top of which)
 

·
Registered
Joined
·
574 Posts
Discussion Starter #2
Well it became pretty obvious that the lower shield braces go on over top of the main shield braces. It just will not fit right any other way.

I guess I will just kinda eye in the upper shield adjustment since the lowers bracket covers up the adjustment graduation marks on the upper bracket.
 

·
Registered
Joined
·
299 Posts
Well it became pretty obvious that the lower shield braces go on over top of the main shield braces. It just will not fit right any other way.

I guess I will just kinda eye in the upper shield adjustment since the lowers bracket covers up the adjustment graduation marks on the upper bracket.
Yes the lowers go on the outside so you see that nice chrome. It does cover the marks.
 
1 - 3 of 3 Posts
Top