Sorry if this has been dealt with on another thread, but I couldn't find it. I purchased ISO pegs to replace the stock pegs on my 900 custom, but I'm having trouble figuring out how the stock pegs are attached to the bike so I can remove them. Any advice would be appreciated. Thanks.
Need help replacing pegs
1 - 3 of 3 Posts
Joined
·
3,886 Posts
See if this helps. See parts 92043 and 482. On the other side 92043a and 92033.
http://www.cheapcycleparts.com/model_years/2715-kawasaki-2010-vulcan-900-custom-vn900-caf/assemblies/244114-footrests
http://www.cheapcycleparts.com/model_years/2715-kawasaki-2010-vulcan-900-custom-vn900-caf/assemblies/244114-footrests
Thanks, the diagram did help. It took about 10 minutes total to change both pegs. Thanks again.
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Laser Iridium plugs??
Vulcan 900My bike doesn't like early starts, just like me. If I'm lucky it will need 2 stabs of the starter, sometimes 3 but never once like it does in the middle of the day. What Laser Iridium plugs make for easier starting? (It doesn't get that cold in my locale, rarely below freezing.)- 7
- 155
-
Crispin78 · updated
-
How do you remove a Mustang Wide Touring seat from a VN900C (Custom) with backrest?
Vulcan 900I recently ordered a Mustang Wide Touring seat for my 900 Custom (with the short sissy bar) and had some trouble installing it - the nose would hook under the tank and the pillion seat would wedge nicely in the arms of the OEM(?) short backrest, but it wouldn't get a positive latch on the posts...- 0
- 36
-
ERROR_USERNAME · updated
-
floor boards
Vulcan 900Hello all, Hope yall are riding safe. I have a 2012 vulcan 900 classic lt and was wondering if anyone has removed there floor boards and switched to pegs. And if so whats your thoughts on the change. Im a 6'5" 280 pound guy so having the floor boards do not give me any kind of stretch in my...- 0
- 46
-
what narrower seat will fit the 900 classic lt
Vulcan 900Hi, bought an 07 in late fall, and I'm short. 5'. I find the stock seat quite wide for me at 16". Is there a narrower seat that will fit? thank you for the replies. P.s. I'm in Canada, so ordering will depend on where it's located.- 5
- 200
-
LanaB · updated
-
Vulcan 900 Spark Plug Wrench
Vulcan 900What tool are you guys using to change your spark plugs? The Kawasaki 92110-1132 (TOOL-WRENCH,BOX,16MM) appears to only come with the 2007-2009 models. Is this tool necessary or can I just use a normal 16mm spark plug socket with a 3/8" ratchet and extension?- 1
- 77
-
sledar · updated
Join now to ask and comment!