Kawasaki Vulcan Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
126 Posts
Discussion Starter #1
Anyone had trouble with the classic mustang seat not fitting real snuggly.....will wiggle back and forth pretty easily (when not sitting on it)
 

·
Registered
Joined
·
98 Posts
Have to agree with checking the spacers and also that the bracket from the old seat are tight. Mine fits snug as a bug
 

·
Registered
Joined
·
126 Posts
Discussion Starter #4
Mine fits very snuggly. No movvement issues at all. You might check and make sure the spacers for the custom are not installed. Thats the oly thing I can think of.
No spacers used.

I just installed yesterday, while their instructions did not mention them, the seller (bought used - lightly used) had included washers. I added a washer so there was one under the bolt head before the bracket and one under the bracket before the bolt goes into the bike.

I removed those today and it helped....but I used to have one of these on both my Vstars and remember them fitting pretty tightly....this one is secure, but still has some side to side movement when I'm not sitting on it. Probably not a big deal....but thought I would look into it here.

Thanks all! :D
 

·
Registered
Joined
·
40 Posts
My Mustang seat is a bit loose also - My 300lbs hold it down just fine...
 
1 - 6 of 6 Posts
Top