Kawasaki Vulcan Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
28 Posts
Discussion Starter #1
Just installed a Jardine Highway Bar and Kuryakyn pegs on my 2009 900 Classic. EASY EASY EASY and looks great. Bolts up on the front bolt on the floorboards and the top frame bracket bolts to the top radiator mount and horn mount. Horn bolts back up to the same mount fitting over the bar mount plate. 150.00 at Dennis Kirk. Flawless chrome 1 1/4 bar diameter. Also installed the Saddleman rigid mount specific make saddlebags. They look great but here's a tip. The included saddlebag support brackets are bent slightly outward and the bags will tilt out when installed. I took the brackets and bent the mount flanges straight with a torch. These are chrome so the heat discolors them. No problem, just scuff them up and prime and paint them black. When installed, you can't see them but rather than have discolored chrome, I chose this method. The bags are straight now and look nice. :)
 

·
Registered
Joined
·
252 Posts
Without photos it didn't happen :)
 
1 - 2 of 2 Posts
Top