Kawasaki Vulcan Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
71 Posts
Discussion Starter #1
Not many vn900s in Greece so was wondering if the gap between the license plate light cover and the fender is normal or mine is somehow bigger as illustrated in the photo I took.
 

Attachments

·
Registered
Joined
·
67 Posts
mine is pretty tight to the fender
 

·
Registered
Joined
·
155 Posts
That looks off, mine touches the fender. There are wires under there, I'd remove it and make sure the wiring harness is not getting caught in anything and put it back on.
 

·
Registered
Joined
·
71 Posts
Discussion Starter #7
That looks off, mine touches the fender. There are wires under there, I'd remove it and make sure the wiring harness is not getting caught in anything and put it back on.
I looked under it again and it looks like there are two grey plastic like washers between the metal signals bracket and the fender that are not mentioned in the parts section. I will take it apart and see if they are the cause of the gap. Maybe the previous owner did it so the aftermarket signals he had on cleared the fender.
 
1 - 7 of 7 Posts
Top