Kawasaki Vulcan Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
I was searching the internet for some additional nighttime side lighting options for the Voyager. I had settled on some amber and red led strips to mount fore and aft somewhere on the bike. I spotted some images from Lunasee (no links since I'm a newbie) and was intrigued enough to purchase and install while I put some new Michelins on. I figured the rear would be mostly blocked by the saddlebags, but, you never can tell what will get the attention of someone driving a car. The wife took a picture from the side. It wasn't completely dark. The rims appear to have reflective tape, but they are actually glowing in the dark.
 

Attachments

·
Registered
Joined
·
1,111 Posts

·
Registered
Joined
·
1,111 Posts
For the hidden LEDs, where did you electrically tap into? I haven't really gone through their website yet.
 

·
Registered
Joined
·
6 Posts
Discussion Starter #4
The PRO1000 controller draws .4 amps for the 4 leds. Originally I wired straight to the battery (fused). I'll switch it to the headlight circuit shortly.
 
1 - 4 of 4 Posts
Top