Kawasaki Vulcan Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1 (Edited)
Have a Power commander on bike along with cobra long exhaust. I cant get the computer(power commander) to keep a idle, but runs fine on highway. Ran fine last year. Any ideas ? Or replace the commander with something better?

Looking for someone in the KC area to work on it thats familiar with after market equipment.
 

·
Registered
Joined
·
288 Posts
SET THROTTLE POSITION
Select Power Commander Tools !Set Throttle Position
The Set Throttle Position window allows you to re-calibrate your throttle position if
needed.
To reset both the closed and open throttle positions, ensure that the PCIII USB is
powered up and connected to the computer via the USB cable, then do the following.
1Click Reset.
2Twist the throttle wide open and release.
3Click OK.
4To reset only the Closed or Open position do the following.
5Click the arrow next to the Closed box or the Open box
6Click OK.
 
1 - 10 of 10 Posts
Top