Kawasaki Vulcan Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
644 Posts
Email sent.
 

·
Registered
Joined
·
644 Posts
• Remove:
Fuel Tank (see Fuel Tank Removal in the Fuel System
(DFI) chapter)
Spark Plug Caps
• Remove the spark plug using a 14 mm (0.55 in.) plug
wrench vertically.
CAUTION
The insulator of the spark plug may break if
when the wrench is inclined during loosening.
Inclined Spark Plug Wrench

• Replace the spark plug with a new one.
Standard Spark Plug
Type: NGK ILZKAR7B11
• Insert the new spark plug and plug wrench in the
plug hole, and finger-tighten it first.
• Using the plug wrench vertically, tighten the plug.
CAUTION
The insulator of the spark plug may break if when
the wrench is inclined during tightening.
Torque - Spark Plugs: 18 N·m (1.8 kgf·m, 13 ft·lb)
• Install the spark plug caps securely.
• Be sure the spark plug caps are installed by pulling up it
lightly.
 
1 - 5 of 5 Posts
Top