Kawasaki Vulcan Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
113 Posts
Discussion Starter #1
Two of the same Jack Stands .Two pieces Of angle iron welded to make a T'

Top lateral piece, 2 holes drilled so that there will be a space between them .

I used Inline roller skate brns.A spirit level was used to level the setup vertically and laterally.I have balanced my 2 Wheels of the Vulcan 900 and tested at 90MPH no problems.

In this set up I have incorporated a centering mechanism to balance Car wheels also.The device was balanced and alignment marks made.

Cars wheels were balanced and tested --Perfect
 

Attachments

·
Registered
Joined
·
113 Posts
Discussion Starter #6
car/mc wheel balancer

Renaldo, the difference with this setup, it can balance both MC wheels and cars.I recently balanced the whel hub and adapters of a custom car (DAYTON GOLD PLATED RIMS) then the wheels .It stopped the vibration of the car.NB when the Tire shop balance your wheel ,u not shure of the balance of Drums and rotors
 
1 - 6 of 6 Posts
Top