Kawasaki Vulcan Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
33 Posts
Discussion Starter #1
I sold my 900 to my son but the Hid burnt out and only had high beam anyway but their is no name on it and you have to replace part of the wiring harness. Cant find any pictures of it on the web. It has two female ends and one male. Bulb is long narrow and has a wire along its side with chrome shield and the stock wiring is still there but has no juice. When hooking up the Hid do u think they cut the bright and dim and all I need to do is take all the HID wiring of and hook together wires for the stock light? The back of the bulb has 3 small philips screws and I found some on the net but the wiring is different.
 

·
Registered
Joined
·
33 Posts
Discussion Starter #2
The Hid was not cut in. It was all by itself so I see why it only had high beam. The high beam light doesnt com on and the fuse is good. What am I missing???
 

·
Registered
Joined
·
33 Posts
Discussion Starter #3
UM UM UM, Dont forget to start your bike to see if the head light works LOL. After 2 teips to the Kaw shop but that was worth it as it was free bikini wash your bike day.
 
1 - 3 of 3 Posts
Top