Kawasaki Vulcan Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
22 Posts
Discussion Starter #1
Hey guys I hve a vn 900 custom and I have a new seat that did not come with the bracket that connects to the seat latch so I took of the orginal one and put it on the new seat but it will not reach an won't latch on .. have any of you had this issue , and might u know where I can find this piece ... also idk what brand the seat is due to it not having a make or modle just numbers. Any help would be great.
 

·
Registered
Joined
·
1,554 Posts
Put a washer or two (or three) under the bracket. Should help it reach.


Sent from my Motorcycle iPhone app
 

·
Registered
Joined
·
22 Posts
Discussion Starter #3
Tottaly didnt think of that lol thank you ill give it a try tomarrow morning thanks bud
 

·
Premium Member
Joined
·
2,311 Posts
Most seats come with 3/8" thick spacers to install between the bracket and seat when using on a Custom. Use 1" long bolts instead of the shorter bolts. The bolts are usually 1/4"-20, not metric. You can find the nylon 3/8" spacers (and bolts, of course) at most hardware stores.
 
1 - 5 of 5 Posts
Top