Kawasaki Vulcan Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
Hi all,
Looking for some help...
Having an issue with fuel pump not coming on. Pump works when hooked up to 12v, but not workin when ignition or cranking. Am i right in sayin that it needs the 2 wires going to each of the coils to work the pump correctly?
I had put a wire goin from ignition to pump so that it came on when key on. But not sure thats wise ?
 

·
Registered
Joined
·
4 Posts
Discussion Starter #3
Bearslayer,
Many thax for ur reply. ive just earlier found the problem😁 was a dodgy 4pin connector to the pump. Opeed it up abd cobbected it and now worki great.
There is a type of relay connectd to 2 wires. It has 6.4 stamped on it? Is that type of relay?
 

·
Premium Member
Joined
·
926 Posts
not sure , I know that on most scoots unless there is a massive switch there is usually a relay.
I have had several problems with my horn relay. so I usually check them and connections first.
 
1 - 4 of 4 Posts
Top