Kawasaki Vulcan Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
63 Posts
Discussion Starter #1
So my new to me 2012 VV would run hot at traffic lights since I got it. I confirmed today that the fans(both radiator and KAMS fan) werent coming on even as gauge read H. I checked the 10 amp fan fuse and sure enough it was blown. Installed a replacement and both fans now come on and cycle like they should.

Any ideas as to why the fan fuse would have blown?

Craig
 

·
Registered
Joined
·
3,895 Posts
Unless you know the previous owner, there is no way of knowing. If it blows again, then maybe it should be easier to determine why.
 

·
Registered
Joined
·
377 Posts
Hi Craigmri;

I don't have a KAMS ('09 1700 Classic) so I don't know how it is supposed to be wired, but I would check with the dealer and see if the KAMS should have its own fused circuit and not be wired up with the radiator fan fuse/circuit. Might be a bit of an overload for that circuit if both come on exactly at the same time...??

Just a suggestion. Good luck finding out what might have happened.

WEG
 
1 - 3 of 3 Posts
Top