Kawasaki Vulcan Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
158 Posts
Not sure about that specific fairing itself but Tsukayu's strong hard bags IMO are great quality. Pretty sure the fairing is the same quality. Pricey though. I went with Memphis Shades batwing and Hogtunes for Memphis Shades batwing that attaches to it. They sound great!
.
You can also go with Kuryakyn Sportech with audio kit for about $1K.

http://www.cruisercustomizing.com/sportech-fairing-plus-for-metric-cruisers/part/KY-1394

http://www.cruisercustomizing.com/sportech-fairing-accessory-audio-kit/part/KY-1399
 

·
Registered
Joined
·
16 Posts
Discussion Starter #3
Not sure about that specific fairing itself but Tsukayu's strong hard bags IMO are great quality. Pretty sure the fairing is the same quality. Pricey though. I went with Memphis Shades batwing and Hogtunes for Memphis Shades batwing that attaches to it. They sound great!
.
You can also go with Kuryakyn Sportech with audio kit for about $1K.

http://www.cruisercustomizing.com/sportech-fairing-plus-for-metric-cruisers/part/KY-1394

http://www.cruisercustomizing.com/sportech-fairing-accessory-audio-kit/part/KY-1399
Thanks for the info but u get a bigger bang for ur buck at http://www.tsukayu.com/QuickDetachab...ngwithGPS.html
The only problem I am finding is that I changed out the original handlebars for a narrower set, so have to check to see if that will have any effect.
Also just found out the width of the faring is 38" and the shed that I keep the bike in is only 34 inches wide. I have to play around with the bike as it is by turning the mirrors inward and maneuvering one side the the handlebar inside first and then swing in the other side of the handlebar.
It probably would not fit at all with the faring on so then my only option is to leave it outside with a cover on it.

Thomas
 

·
Premium Member
Joined
·
3,670 Posts
According to my conversation with kury, the sporttec does not fit our 9's. There are no brackets as of yet. I know its listed by cc and other sites, but it ain't gonna happen.
 
1 - 4 of 4 Posts
Top