Kawasaki Vulcan Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter #1
Put a RAM mount on the clutch and brake reservoirs and the clutch side has a small leak, more like a dribble. I took the cap off and cleaned the cap, plastic spacer and rubber seal hoping that would solve the problem but it didn't. I took the RAM mount off and used the stock bolts with just the cap and it is still seeping, any ideas?
 

·
Premium Member
Joined
·
1,707 Posts
Sounds like you may have disturbed the "O" ring and may need to replace it. A warped cap can make the plastic cover leak also. Did you over tighten the RAM screws?
 

·
Registered
Joined
·
16 Posts
Discussion Starter #3
Sounds like you may have disturbed the "O" ring and may need to replace it. A warped cap can make the plastic cover leak also. Did you over tighten the RAM screws?
I pulled it apart again and wiped each piece including the reservoir and it seems to be holding now. I don't think I over-tightened them, but anything is possible.
 
1 - 3 of 3 Posts
Top