Kawasaki Vulcan Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
122 Posts
Discussion Starter #1
could some one please tell me what size of pilot jet to use for my 2001 classic. mods are a debaffled exhaust and a partial grampsize (airbox out, and back off snorkel)
I have a dynojet stage one needle to use and the main jet I was going to use from the kit is a 168.
And i really need to know the correct make and model of the carb for ordering parts. Is it keihin CVK 36???
 

·
Registered
Joined
·
3,897 Posts
Carb part number is 15003-1200, and it is a Keihin CVK 36. For the pilot jet, I have a 48, the stock size with idle mixture out about 2 1/2 turns from lightly bottomed. I was running a 50 pilot, but went back to the 48 after having it dynoed with air fuel sensors and I was running rich at low speeds, in the low 12:1 range. I have the full Grampsized and baffles out of stock pipes.
 
1 - 2 of 2 Posts
Top