Kawasaki Vulcan Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1 (Edited)
245510
Decided to try a 26 on my Vulcan classic. With a few small mods it worked out great. Just had to machine down the spaces and shave down the brake mounts a bit. Rides amazing.. also added air ride to the rear
 

·
Super Moderator
Joined
·
2,716 Posts
Welcome to the forum from North Carolina. Happy you decided to join us. Great looking ride. Am sure some other members will like some information on the swap and the air ride. Thanks again for becoming part of the forum. Be well and Ride Safely.
 

·
Registered
Joined
·
20 Posts
Could you share with us which wheel you purchased and go into a little more details on spacing and shaving please? Your bike looks awesome! Thank you for shairing.
 

·
Registered
Joined
·
5 Posts
Discussion Starter #5
26 inch mammoth wheel from 2013 road glide
Machined down the spacers .25 inches on each side
The brake mounts I shaved about an 1/8 of an inch from each side. Fairly simple
 

·
Registered
Joined
·
5 Posts
Discussion Starter #9
Did you have to put a rake kit on your bike?
Welcome to the forum from North Carolina. Happy you decided to join us. Great looking ride. Am sure some other members will like some information on the swap and the air ride. Thanks again for becoming part of the forum. Be well and Ride Safely.
the air ride is literally a 30 min job. Bolts right up.
 
1 - 9 of 9 Posts
Top