Kawasaki Vulcan Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
28 Posts
Discussion Starter #1
Bought the bike with a hypercharger on it.. Taking it off for a 9" high flow filter on the right side only.....
Seeking to
1) identify line circled in pictures
2) figure out what to do with it!
Thanks!
246645
 

·
Super Moderator
Joined
·
3,013 Posts
Don’t own your model, and don’t know if this hose is OEM to the bike. Here is a parts diagram. Is this hose illustration number 702? Did it have a plug in the bottom? Looks like a vent hose. Where does the top hose connection hook up? Hopefully some other members with your model will contribute their opinions.

 

·
Registered
Joined
·
5 Posts
Have a look at the hypercharger fitting instruction, there are plenty online. I know when I fitted mine some rubber pipes were set aside as they were no longer needed. The diagrams were quite detailed.
 

·
Registered
Joined
·
28 Posts
Discussion Starter #4
Turns out it goes into the air intake just after the butterfly valves... There were two.. One circled and one that went to an air valve? Since the lines from the air valve were all disconnected...I cut the line to about 4 inches, pulled the other line, and looped it back on itself :)
 
1 - 4 of 4 Posts
Top