Kawasaki Vulcan Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
1,025 Posts
My Vulcan when I put it in first gear I feel it go in but when I let out clutch it don't move any ideas?
are you saying that the engine keeps running but the bike doesnt move?

If it doesnt move at all then you have a complete clutch operation failure, possibly the push rod has stuck in. or the anti lock up washwers have failed, or the plates are completey useless.
Has this just happened? was it working ok before?
What was the last work done on the bike?
 

·
Registered
Joined
·
436 Posts
Yeah, it seems like there's got to be a little more to the story. How was the bike running before this happened? Clutches don't usually just stop working without some symptoms leading up to failure.
 

·
Registered
Joined
·
3 Posts
Discussion Starter #4
Got bike on trade just tryin to make sure what's wrong before I dump a bunch of money into it it's a nice bike it runs real good got 40000 miles on it
 

·
Registered
Joined
·
238 Posts
I wouldn't be surprised if the clutch spring has gone bad. The clutch springs don't seem to last very long on these bikes unless you get a Mean Streak spring and some Judge's washers. Either that, or it could have the wrong oil in there.
 
1 - 6 of 6 Posts
Top