Kawasaki Vulcan Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
My 09' Classic has both 'roadlamps & turn signals' on the front bar assembly and I need to replace them. The wires have broken off of the internal electric bulb connector. The wires appear to go inside the cross bar.
Are there any videos that show how to do this? Thanks for any help or suggestions.
 

Attachments

·
Registered
2009 Kawasaki Vulcan 1700 Classic
Joined
·
42 Posts
I have the same bike. Last week I added LED turn signals, threaded the wires thru the chrome pipes on each side and soldered the wires to the existing lamp sockets shown in your pictures. The rubber gaskets are tight which is good for keeping out moisture but hard to add extra wires. Your bulb sockets look to be in good shape. Maybe the existing wires could be soldered back on.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top