Kawasaki Vulcan Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hello. I’ve just recently gotten my 2nd bike after about 10 years of no riding. Got an 01 Vulcan 800 classic and it has a few problems. First of all it only ran on choke so I took the carbs off and cleaned them twice and got new rebuild kit in there same problem. Then I changed the petcock to an oem one. Still no change. Changed plugs and saw one wasn’t firing so I changed the coils and the ic igniter. Now it will idle but die after a few minutes and will only run on prime now. Also I can’t give it 100 percent throttle without it bogging and dying. i am stumped and don’t know what to do besides take it to a shop. Any help would be great. Thank you in advance.
 

·
Registered
Joined
·
18 Posts
Is the vacuum line between the carb and the petcock attached and OK? Are the exhaust and air intake completely stock?
 
1 - 2 of 2 Posts
Top