Please Help - Tune Motor / Carb - Kawasaki Vulcan Forum : Vulcan Forums
 
LinkBack Thread Tools Display Modes
post #1 of 2 (permalink) Old 03-21-2018, 09:11 AM Thread Starter
Member
 
GolferScott's Avatar
 
Join Date: Jun 2017
Posts: 64
Please Help - Tune Motor / Carb

Hey guys, I bought a VN800 last June and i have been working on tearing it down and rebuilding it since then. The project has taken longer than I wanted because I have taken quite a few breaks in between lol. Basically I tore the bike down to nearly the frame, repainted and replaced almost everything on the bike to make it nearly as new as possible.

During the process, i debaffled the exhaust and also did the scooterize K&N air filter mod. I bought the DynoJet Stage 1 kit and a while back I did the carb rebuild and put in a different needle (honestly dont recall which one?). and since then, the carb and the bike have sat for nearly 6 months.

I have finally gotten all the cosmetic things done (bike painted, new fenders, blah blah) and i am working this week on getting the bike back up and running. The one thing I am nervous about is tuning the carb. Since I do not recall what needle I put in it from the kit. i dont even recall if there were different needles given?

so my question is... what all should I look at doing when getting this back up and running given the things I did (debaffle, scooterize, stage 1 kit)..
GolferScott is offline  
Sponsored Links
Advertisement
 
post #2 of 2 (permalink) Old 03-21-2018, 09:13 AM Thread Starter
Member
 
GolferScott's Avatar
 
Join Date: Jun 2017
Posts: 64
this is basically the same kit i bought.

https://www.ebay.com/itm/Dynojet-Res...1YonMr&vxp=mtr
GolferScott is offline  
Sponsored Links
Advertisement
 
Reply

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Newbie here. hold my hand and help me tune this VN800A Carb bingerbanger Vulcan 800 6 01-28-2018 12:19 PM
Very Bad Vulcan Motor Vibration Help Please Motor-Guy Vulcan 800 8 05-28-2014 02:50 PM
Another Carb Tune thread!!! :) cumminnow Vulcan 800 7 05-31-2013 11:46 PM
Auto Tune Install HELP ShadaarLogath Vulcan 900 2 01-27-2012 10:30 AM
power commander III tune help 07custom Vulcan 900 1 09-01-2011 08:11 PM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome