Dual Exhaust on 1700 Classic - Kawasaki Vulcan Forum : Vulcan Forums
 
LinkBack Thread Tools Display Modes
post #1 of 6 (permalink) Old 06-03-2013, 02:56 PM Thread Starter
BOTM Winner
February 2016

 
CaptKurt's Avatar
 
Join Date: May 2012
Year/Make/Model: 2014 Kawasaki Vaquero
Displacement/CC's: 1700
Color: Metallic Black
Gender: Male
Posts: 265
Garage
Dual Exhaust on 1700 Classic

Anyone ever seen a bagger style (i.e. Voyager/Vaquero) dual (one pipe on each side) exhaust on a 1700 classic?

Are there any fitments out there for this, or existing exhaust systems for this?

I assume that the Classic frame does not have the necessary mounts for the exhaust and possibly does not even have the space behind the engine to run the pipes.

Thoughts?

CaptKurt
Secretary
Temecula Valley Vulcan Riders, chapter 1-22

2014 Vulcan 1700 Wind Therapy "Vaqueroger" Vaquero ABS - KlockWerks 9" shield, RacynRay ISO Grips, Luverne Kawi Lowering Kit; Vance & Hines Exhaust; Thunder Mfg intake; Ivan's ECU Flash; Mustang Wide Touring Saddle; XM/iPod adapaters; Voyager trunk on Wompass Rack; Randy's 6.5" adapters; Rockford Fosgate amp; Polk Audio speakers; custom painted by Kevin Norton.
CaptKurt is offline  
Sponsored Links
Advertisement
 
post #2 of 6 (permalink) Old 06-03-2013, 03:05 PM
Top Contributor
 
davidsheek's Avatar
 
Join Date: May 2010
Location: Orange Park Florida
Posts: 2,115
Garage
Have you tried looking at " Freedom Performance Freedom Duals "?
https://www.vulcanforums.com/forums/s...ad.php?t=51402


To view links or images in signatures your post count must be 1 or greater. You currently have 0 posts.

2009 Vulcan Voyager ABS/ my "Blue Goose"
BIG 3 = PCV w/ Ign/Cobra Slip-ons/Thunder Air Kit
Kuryakyn "Longhorn Offset Highway Pegs"
Air Hawk2 seat cusion/Remote Control for house
National Cycle Fender Tips//Utopia Back Rest
Gorilla Alarm/Strebel Air Horn/14 in. Dark Shield
Kaw Rear Speakers/Galfer Break Pads
Garmin GPS, RAM mounted on break reservoir
Chrome Mug Holder/Extra Chrome/Wrapped Pipes
Flags and Mounts from "Rumbling Pride"
Dunlop SP5000 Car Tire /AMSOIL & Filter
davidsheek is offline  
post #3 of 6 (permalink) Old 06-03-2013, 03:10 PM Thread Starter
BOTM Winner
February 2016

 
CaptKurt's Avatar
 
Join Date: May 2012
Year/Make/Model: 2014 Kawasaki Vaquero
Displacement/CC's: 1700
Color: Metallic Black
Gender: Male
Posts: 265
Garage
As far as I know that is only for the Vaquero

CaptKurt
Secretary
Temecula Valley Vulcan Riders, chapter 1-22

2014 Vulcan 1700 Wind Therapy "Vaqueroger" Vaquero ABS - KlockWerks 9" shield, RacynRay ISO Grips, Luverne Kawi Lowering Kit; Vance & Hines Exhaust; Thunder Mfg intake; Ivan's ECU Flash; Mustang Wide Touring Saddle; XM/iPod adapaters; Voyager trunk on Wompass Rack; Randy's 6.5" adapters; Rockford Fosgate amp; Polk Audio speakers; custom painted by Kevin Norton.
CaptKurt is offline  
 
post #4 of 6 (permalink) Old 06-03-2013, 05:11 PM
BOTM Winner, December 2013
 
big worm's Avatar
 
Join Date: Dec 2008
Location: prince edward island canada
Posts: 1,172
those pipes fit the vaquero, voyager, and the nomad..... and can be fitted to the classic (as in it will bolt up to the engine and have all the proper clearance) but it will require custom made hangers......as the baggers have the hangers incorporated into the saddlebag mounts.

VN 900 custom "Cheapo-Glide"
Reckless (clone of) fairing
Sony dsx-s100 stereo
Pioneer (for now) 6X9 2-way speakers
Flh hardbags
Mustang "daytripper" seat
Rear lowered 2"
Cobra powerpro HP 2-1
PCIII
Homemade intake with K&N filter
big worm is offline  
post #5 of 6 (permalink) Old 06-03-2013, 07:58 PM
Senior Member
 
Join Date: Apr 2011
Location: Fitchburg, WI
Year/Make/Model: 2009 Kawasaki Classic
Displacement/CC's: 1700
Color: Black
Gender: Male
Posts: 186
Garage
I believe Big Worm is correct. I have a Classic and was seriouly considering installing duals as I have hard saddle bags. However I think (and could be wrong) the left pipe would be in the way of removing the axle bolt.

Stitch
Stitch is offline  
post #6 of 6 (permalink) Old 06-03-2013, 08:34 PM
BOTM Winner, December 2013
 
big worm's Avatar
 
Join Date: Dec 2008
Location: prince edward island canada
Posts: 1,172
that's correct stitch you would either have to remove the left pipe or the shocks in order to remove the axle...just as you would on the vaquero, nomad, and the voyager

VN 900 custom "Cheapo-Glide"
Reckless (clone of) fairing
Sony dsx-s100 stereo
Pioneer (for now) 6X9 2-way speakers
Flh hardbags
Mustang "daytripper" seat
Rear lowered 2"
Cobra powerpro HP 2-1
PCIII
Homemade intake with K&N filter
big worm is offline  
Sponsored Links
Advertisement
 
Reply

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
WTB Dual exhuast headpipes for 1700 Stitch Wanted to buy or trade Items 3 03-20-2013 07:33 PM
Muzzy true-dual exhaust on VN-1500 Classic winstoncup Vulcan 1500 0 11-05-2010 03:15 PM
TEXAS - Cobra True Dual exhaust and FI2000r - Nomad el_chupo_ Bikes For Sale 3 10-24-2010 08:55 PM
dual exhaust mr president Vulcan 1600 3 08-17-2009 05:07 PM
Tallannies dual exhaust baggers.... DONE Tallannie Vulcan 1500 6 07-31-2009 01:44 PM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome