He pipes on a voyager 1700 - Kawasaki Vulcan Forum : Vulcan Forums
 2Likes
  • 1 Post By Kawkrazd
  • 1 Post By dlars
 
LinkBack Thread Tools Display Modes
post #1 of 2 (permalink) Old 04-19-2018, 07:58 PM Thread Starter
Junior Member
 
Kawkrazd's Avatar
 
Join Date: Jan 2017
Posts: 13
He pipes on a voyager 1700

I installed a set of screaming eagle cvo 2015s on mine. Was not hard. Cut off the left side one at the clamp stop. Had to fab a short piece for the right side. The results was very shocking. They sound very good. They increased the low end torque. I later took the fiberglass packing out and left the metal baffles. Sounds even better. I later found out V&H MAKES those pipes for HD. Only had the drill a hole for the ox sensor. I used a piece of flat bar. For a adapter.

Sent from my SM-G930P using Tapatalk
bullcrapallday likes this.
Kawkrazd is offline  
Sponsored Links
Advertisement
 
post #2 of 2 (permalink) Old 04-20-2018, 04:06 PM
Top Contributor
 
dlars's Avatar
 
Join Date: Aug 2012
Location: Alberta, Canada
Posts: 580
Garage
Quote:
Originally Posted by Kawkrazd View Post
I installed a set of screaming eagle cvo 2015s on mine. Was not hard. Cut off the left side one at the clamp stop. Had to fab a short piece for the right side. The results was very shocking. They sound very good. They increased the low end torque. I later took the fiberglass packing out and left the metal baffles. Sounds even better. I later found out V&H MAKES those pipes for HD. Only had the drill a hole for the ox sensor. I used a piece of flat bar. For a adapter.

Sent from my SM-G930P using Tapatalk
Can you post some pics and possible a link to a sound clip
Demoliton Man likes this.

2012 Kawasaki Voyager
Thunder Manufacturing Round Air Kit
Dynojet PCV Fuel Processor
Dynojet AT-300 Autotune Module
Freedom Performance True Dual's (racing Baffles)
Kuryakyn Offset Highway Pegs
Michellin Commander ll's Front & Back
RacnRay's Throttle Grip
iPod Connector
Manual Fan Switch
dlars is offline  
Sponsored Links
Advertisement
 
Reply

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
He said he didn't hear me... how do I fix that? Romans5.8 Vulcan 900 62 04-24-2012 02:10 PM
He stole it from you, Poncho Villa The Lounge (Off Topic) 4 12-05-2011 12:04 PM
Were the he!! is the coolant level gauge dogg Vulcan 2000 8 09-11-2011 02:20 PM
He did it again jpwest5 Vulcan 500 14 04-18-2010 08:46 AM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome