ECU modification - Kawasaki Vulcan Forum : Vulcan Forums
 
LinkBack Thread Tools Display Modes
post #1 of 3 (permalink) Old 06-24-2012, 12:04 PM Thread Starter
Junior Member
 
Join Date: May 2012
Posts: 24
ECU modification

Does anyone know if the OEM ECU can be remapped to accomodate Vance and Hines Slash cut slip-on pipes? I am getting backfires and don't neessarily want to spend the money for a fuel commander.
visa11 is offline  
Sponsored Links
Advertisement
 
post #2 of 3 (permalink) Old 06-24-2012, 07:15 PM
Top Contributor
 
wbilotta's Avatar
 
Join Date: Jan 2010
Location: Joliet, IL
Posts: 765
Not by the average guy. When the recall came out for the engine stalling my dealer told me the defective ECU's were shipped back to Kawasaki to be reprogrammed.
wbilotta is offline  
post #3 of 3 (permalink) Old 06-27-2012, 07:51 AM
Top Contributor
 
BrucerZX14's Avatar
 
Join Date: Jan 2011
Location: Abilene, TX
Posts: 644
Garage
The after market pipes don't have catalytic convertors in them. If you're getting back-firing, block off the air hose going to the AIS system. This system lets air in the exhaust to burn off any raw fuel for EPA concerns. Blocking it off stops the it from opening to let air in.

2010 Voyager
Roaring Twinz Air Kit
Thunder Manufacturing dress-up plate
VN1500 kickstand
Chrome bling on passenger floorboards
Rockford Fosgate Amplifer
Polk Audio/Kicker speakers
Kawasaki CB radio
Rear speaker kit
Vance & Hines Twin Slash slip-ons
Power Commander V
Portable XM radio thru AUX
Marvellas trailer hitch
Lower bag rails
Kuryakyn Tour-tech cruise peg mounts
Kuryakyn black ISO grips w/bar-end weight & red trim
BrucerZX14 is offline  
Sponsored Links
Advertisement
 
Reply

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
New Stock Intake Modification rs900c Vulcan 900 26 05-30-2014 02:26 PM
Vulcan 900 Intake Modification rs900c Vulcan 900 21 08-29-2013 08:25 PM
Exhaust Modification MOCVDEngineer Vulcan 1500 3 06-05-2009 08:30 PM
Modification of Factory Exhaust stewart21407 General Vulcan Talk 0 03-17-2008 05:01 AM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome