Aux Audio Adapter DIY - Kawasaki Vulcan Forum : Vulcan Forums
 3Likes
  • 1 Post By kmalek
  • 1 Post By kmalek
  • 1 Post By Hallbax
 
LinkBack Thread Tools Display Modes
post #1 of 7 (permalink) Old 09-28-2016, 07:38 AM Thread Starter
Member
 
kmalek's Avatar
 
Join Date: May 2016
Location: Mississauga, ON
Year/Make/Model: 2015 Kawasaki Vulcan Voyager
Displacement/CC's: 1700
Color: Gray
Gender: Male
Posts: 59
Garage
Aux Audio Adapter DIY

Hey guys,
I have 8 sets of connectors to make your own Aux Audio Cable.
All you need is whatever audio cable fits your needs.

$5 plus the actual shipping cost.
Message me if interested and we can work out the details.

Alive392 likes this.

Chris M.

2015 Vulcan Voyager
2007 Yamaha Royal Star Venture - SOLD
2007 Yamaha VStar 1100 Classic - SOLD
kmalek is offline  
Sponsored Links
Advertisement
 
post #2 of 7 (permalink) Old 10-07-2016, 01:35 PM
Junior Member
 
Join Date: May 2016
Location: Georgia
Year/Make/Model: 2010 Kawasaki Voyager
Displacement/CC's: 1700
Color: Red/Black
Gender: Male
Posts: 9
I have actually been trying to figure out what those connectors are. Do you mind telling me what the name or model number is for those connectors?
JaBooty is offline  
post #3 of 7 (permalink) Old 10-10-2016, 10:08 PM Thread Starter
Member
 
kmalek's Avatar
 
Join Date: May 2016
Location: Mississauga, ON
Year/Make/Model: 2015 Kawasaki Vulcan Voyager
Displacement/CC's: 1700
Color: Gray
Gender: Male
Posts: 59
Garage
Quote:
Originally Posted by JaBooty View Post
I have actually been trying to figure out what those connectors are. Do you mind telling me what the name or model number is for those connectors?
It also took me some time to find out exactly what they are...
Not sure which one is the female and which one is the male, but what you are looking for is:
TPS - TRE Connector 6187-3231 / 6180-3241
Alive392 likes this.

Chris M.

2015 Vulcan Voyager
2007 Yamaha Royal Star Venture - SOLD
2007 Yamaha VStar 1100 Classic - SOLD
kmalek is offline  
 
post #4 of 7 (permalink) Old 10-10-2016, 10:17 PM
Junior Member
 
Join Date: May 2016
Location: Georgia
Year/Make/Model: 2010 Kawasaki Voyager
Displacement/CC's: 1700
Color: Red/Black
Gender: Male
Posts: 9
Thanks, I've been looking for that for a while.
JaBooty is offline  
post #5 of 7 (permalink) Old 10-12-2016, 08:17 AM
Junior Member
 
Join Date: Oct 2015
Location: Des Moines, Iowa
Year/Make/Model: 2015 Voyager 1700
Displacement/CC's: 1700
Color: Grey/Black
Gender: Male
Posts: 13
I got one of these from Chris, and after 15 minutes of work . . . I have music from my player. I got two plastic adapters (one male, one female . . . only two genders here) plus three male metal clips and three female metal clips (again, only two genders). I used the female adapter and the male clips.

I took an older Aux cord, cut off the cord at about 12 inches, and stripped the three inside wires. I had bare copper (ground) and a red wire and a white wire. I slipped a shrink wrap tube over the cord, then soldered each of the wires onto a metal blade clip piece. I then crimped over the tabs and pushed each of the metal clips into the white plastic adapter. The yellow wire coming to the back of the harness in my Voyager is ground, so I pushed that wire clip into the correct hole so it lines up correctly. There is a rectangular tab on the adapter, and it points to the hole where the ground wire goes - you can see it the lower left piece in Chris' photo. I then pushed the other two clips in (they all snap into place when you get them in far enough) and slid the shrink wrap tube down and heated it with a hair dryer until it was nice and tight.

Plugged the Aux end into my music player, and the adapter onto the Voyager plug - and I have music. Pretty simple, and works great.

Tim
Alive392 likes this.

Des Moines, IA
Hallbax is offline  
post #6 of 7 (permalink) Old 04-05-2018, 10:14 AM
Junior Member
 
koogeorge's Avatar
 
Join Date: Dec 2016
Location: Toronto, Canada
Year/Make/Model: 2017 Vulcan Voyager ABS
Displacement/CC's: 1700
Color: Meteor Grey/ Metallic Black
Gender: Male
Posts: 7
Quote:
Originally Posted by kmalek View Post
Hey guys,
I have 8 sets of connectors to make your own Aux Audio Cable.
All you need is whatever audio cable fits your needs.

$5 plus the actual shipping cost.
Message me if interested and we can work out the details.

I know this is an older thread but I need this post to enable my PM priviliges as a newer member.
Do you still have any available? If so I would be interested. Thanks George
koogeorge is offline  
post #7 of 7 (permalink) Old 04-12-2018, 09:13 AM
Senior Member
 
T Gibbs's Avatar
 
Join Date: Apr 2017
Location: Tennessee
Year/Make/Model: 2012 Vulcan Voyager
Displacement/CC's: 1700
Color: Pearl White/ Beige
Gender: Male
Posts: 169
Garage
I'm impatient, and an electrician. I cut mine off and spliced on what I needed.

2012 1700 Voyager
Cobra Slip Ons
Kuryakyn Grips
Kuryakyn Highway Pegs
Klock Werks Windshield
Mustang Seat with Driver Backrest
Kenwood Stereo
Soundstream Amp
Engineered adapters with 6-1/2"Polk Audio Front Speakers
Kawasaki Rear Speaker Pods with Polk Audio 5-1/4" Speakers
Ivan's Flash
T Gibbs is offline  
Sponsored Links
Advertisement
 
Reply

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Voyager Audio Adapter Kit for Phone GPS shooter56 Vulcan 1700 4 06-07-2015 10:19 PM
Aux power for GPS Amerimutt Vulcan 900 1 03-21-2011 10:32 PM
Home Made Radio Aux Plug Voyager1700 Vulcan 1700 10 01-12-2011 03:28 PM
Aux. Fuel Tank 1waterman Engine Work 3 02-11-2010 08:13 AM
wiring aux lights. Hollywood98 Vulcan 800 5 06-22-2009 10:37 PM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome