Lowers for CUSTOM - Kawasaki Vulcan Forum : Vulcan Forums
 
LinkBack Thread Tools Display Modes
post #1 of 7 (permalink) Old 03-20-2010, 09:53 AM Thread Starter
Member
 
Join Date: Aug 2009
Posts: 75
Lowers for CUSTOM

Hello,
I have done quite a bit of searching and have been unable to find much info regarding lowers for the Custom model. I saw that someone said Memphis Shades had some but they didn't seem happy with the result. I couldn't find any pics on their site and my phone call was not returned. I actually have a Memphis Fats shield and I believe that there may be a way to fabricate a bracket that bolts to the windshield bracketry. Before I start my own design, I know there is a lot of clever people here that may have good ideas. Thanks in advance.
Sailor Bill is offline  
Sponsored Links
Advertisement
 
post #2 of 7 (permalink) Old 03-20-2010, 03:35 PM
Senior Member
 
Bluecruiser's Avatar
 
Join Date: Jun 2008
Posts: 376
I am also planning on fabricating lowers for the Custom. I did find this however it is for the Classic. The same steps may work for the custom with smaller clamps.

http://www.minneapolis-moline.com/lower.html

John
2007 900 Custom
Plasma Blue
Oxford, MI
VROC 25948
Bluecruiser is offline  
post #3 of 7 (permalink) Old 03-20-2010, 03:59 PM
Member
 
timmyg123's Avatar
 
Join Date: Mar 2010
Posts: 61

Or buy the extra unopened set I have for $30.
timmyg123 is offline  
 
post #4 of 7 (permalink) Old 03-21-2010, 10:41 AM Thread Starter
Member
 
Join Date: Aug 2009
Posts: 75
Timmy,

Where are your turn signals? Your lowers are mounted right where my signals are attached.
Sailor Bill is offline  
post #5 of 7 (permalink) Old 03-21-2010, 10:44 AM Thread Starter
Member
 
Join Date: Aug 2009
Posts: 75
Bluecruiser,

I think if you look at your forks, you will see that the smaller part of the fork telescopes into the lower larger area. clamping to the small area may only last until your first bump??
Sailor Bill is offline  
post #6 of 7 (permalink) Old 03-21-2010, 04:18 PM
Member
 
timmyg123's Avatar
 
Join Date: Mar 2010
Posts: 61
its a stock pic. not sure of the bike make.
memphis lower kit MEM9884 kit fits lotsa bikes.
timmyg123 is offline  
post #7 of 7 (permalink) Old 05-03-2010, 06:31 PM
Senior Member
 
Bluecruiser's Avatar
 
Join Date: Jun 2008
Posts: 376
Lower clamp

Placing the lower clamp up high enough on the tube is no problem.

[IMG][/IMG]

John
2007 900 Custom
Plasma Blue
Oxford, MI
VROC 25948
Bluecruiser is offline  
Sponsored Links
Advertisement
 
Reply

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
WTB: Vulcan 900 Custom front wheel, fork lowers Project84 Wanted to buy or trade Items 7 05-06-2015 11:22 PM
Lowers for a Custom dldavis48 Vulcan 900 5 09-01-2014 10:16 AM
Custom colored lowers Dewey405 Wrench Heads 0 08-15-2012 07:34 AM
Lowers for a custom Chupa Vulcan 900 2 03-17-2012 11:06 AM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome