My first take on the Scootworks over drive pulley for the VN900.
I installed the pulley this afternoon, took about 1.5 hours taking my time.
My first drive taking off from my house in first gear I could tell no
difference at all. I almost wanted to go back and make sure I didn't
put the stock pulley back on by mistake. lol
I have to drive about 5 miles in a 25 mph zone to get out to the freeway
from my house. I have no tach but I do have a GPS mounted.
According to the GPS it was reading 25mph and the bike speedo 27.
Normally its about 3 mph off, now only 2mph, no big deal I though and
I still could not tell any difference in the gears.
I hit the on ramp to the freeway and a semi is coming so I floor it
and get up to 70 mph on the bike speedo, The GPS reads 68 mph.
I think that is cool, only 2 mph off when before it was 7 mph off at 70.
But it sounds and feels the same, engine rpm still sounds like its
I make sure I am in 5th gear and would you believe it, I'm still in 4th.
I kick it up to 5th and how sweet it is, I'm cruising at 70 mph and the
engine sounds like its taking a break.
The Scootworks pulley definitely get two thumbs up from me.