rear axle/belt tensioner bolt thread - Kawasaki Vulcan Forum : Vulcan Forums
 
LinkBack Thread Tools Display Modes
post #1 of 8 (permalink) Old 03-21-2013, 07:46 AM Thread Starter
Senior Member
 
arkansasbowman's Avatar
 
Join Date: Jun 2009
Location: Arkansas
Posts: 163
rear axle/belt tensioner bolt thread

I know I could pull the secondary nut and head out to and auto parts or maybe even Lowe's to try and find one,but hate goose chases.

But does anyone know the thread size for the belt tensioner bolt/nut, not the axle but tensioner. Thanks in advance

Tires Down!!!
2009 Vulcan 900 Custom
Mustang Day Tripper w/upgrade insert
Cobra Swept Exhaust
Kuryakyn ISO Grips with throttle boss and Stiletto Ends
Kuryakyn Stiletto footpegs front, ISO Wings Rear
Irate Flame grill and regulator cover
Xelement Saddlebags and Tool Bag
Aftermarket Flame Mirrors
Custom Speedo Dial (R.I.P. w/respect to the creator)
Adjure 7" Ventura Flame with Skull lens
Barron 2" lowering kit, GenMar 2" Risers
Cobra FI2000r 2-2-1
Thunder MFG Tornado Intake
arkansasbowman is offline  
Sponsored Links
Advertisement
 
post #2 of 8 (permalink) Old 03-22-2013, 06:52 AM Thread Starter
Senior Member
 
arkansasbowman's Avatar
 
Join Date: Jun 2009
Location: Arkansas
Posts: 163
no help, LOL

guess off from store to store to try and pick a few up, just wish someone knew the threading on that darn nut, you know it's driving me NUTS

Tires Down!!!
2009 Vulcan 900 Custom
Mustang Day Tripper w/upgrade insert
Cobra Swept Exhaust
Kuryakyn ISO Grips with throttle boss and Stiletto Ends
Kuryakyn Stiletto footpegs front, ISO Wings Rear
Irate Flame grill and regulator cover
Xelement Saddlebags and Tool Bag
Aftermarket Flame Mirrors
Custom Speedo Dial (R.I.P. w/respect to the creator)
Adjure 7" Ventura Flame with Skull lens
Barron 2" lowering kit, GenMar 2" Risers
Cobra FI2000r 2-2-1
Thunder MFG Tornado Intake
arkansasbowman is offline  
post #3 of 8 (permalink) Old 03-22-2013, 08:09 AM
Top Contributor
 
ErnieC's Avatar
 
Join Date: Nov 2012
Location: DFW, TX
Posts: 1,044
Garage
why not just go to the dealer, what's a nut cost from them a few bucks, save on gas if any thing, I bent my pin on front brakes cost me $1.20 at dealer

2006 900 LT

Easy Mods
**********
Crash Bars,Rear Tail Lights in Bags,Cooler bag on Sisy Bar,hand made Bag on Windshield,Wally world Cup Holder,Lower Shields,Gas Tank Bib,Baron Front Pulley


******************************************
**Bikers are hard to find, Bikes are a Dime a Dozen**
******************************************

My Second Hobby:

To view links or images in signatures your post count must be 1 or greater. You currently have 0 posts.

Here is another Hobby of mine model boats

To view links or images in signatures your post count must be 1 or greater. You currently have 0 posts.
ErnieC is offline  
 
post #4 of 8 (permalink) Old 03-22-2013, 08:28 AM Thread Starter
Senior Member
 
arkansasbowman's Avatar
 
Join Date: Jun 2009
Location: Arkansas
Posts: 163
Wish I could, rural area, closet Kawa. dealer is about 40 miles, 5 auto parts stores within 12 miles.

Tires Down!!!
2009 Vulcan 900 Custom
Mustang Day Tripper w/upgrade insert
Cobra Swept Exhaust
Kuryakyn ISO Grips with throttle boss and Stiletto Ends
Kuryakyn Stiletto footpegs front, ISO Wings Rear
Irate Flame grill and regulator cover
Xelement Saddlebags and Tool Bag
Aftermarket Flame Mirrors
Custom Speedo Dial (R.I.P. w/respect to the creator)
Adjure 7" Ventura Flame with Skull lens
Barron 2" lowering kit, GenMar 2" Risers
Cobra FI2000r 2-2-1
Thunder MFG Tornado Intake
arkansasbowman is offline  
post #5 of 8 (permalink) Old 03-22-2013, 07:08 PM
Member
 
Join Date: May 2012
Location: Karitane, New Zealand
Posts: 32
Parts list says 10mm, doesn't give the pitch
http://www.ronayers.com/Fiche/TypeID...Group/Swingarm
Karitane Pete is offline  
post #6 of 8 (permalink) Old 03-22-2013, 07:31 PM
Senior Member
 
Amerimutt's Avatar
 
Join Date: Mar 2011
Location: Jersey Shore (Not a Guido)
Posts: 231
Quote:
Originally Posted by Karitane Pete View Post
Parts list says 10mm, doesn't give the pitch
http://www.ronayers.com/Fiche/TypeID...Group/Swingarm
Good luck even at you dealer...That's if they have a good parts dept.( or they like the look of ya) But that's a common 10 mil fine thread. Home depot ...no! Lowes...no! Ace hardware, Sears hardware or a good Napa dealer with a nut & bolt draw should have it easy.
Try your local hardware store. I mean give em a chance for the traditional easy nuts and bolts. Pep boys advanced auto the zone. Don't waste your time at Home depot and such

It's all fun and games till someone gets the joke!
Amerimutt is offline  
post #7 of 8 (permalink) Old 03-23-2013, 12:20 AM
Junior Member
 
Join Date: Jan 2013
Posts: 28
rear axle/belt tensioner bolt thread

Quote:
Originally Posted by arkansasbowman View Post
I know I could pull the secondary nut and head out to and auto parts or maybe even Lowe's to try and find one,but hate goose chases.

But does anyone know the thread size for the belt tensioner bolt/nut, not the axle but tensioner. Thanks in advance
10m-1.25


Sent from Motorcycle.com Free App
John_rubino is offline  
post #8 of 8 (permalink) Old 03-23-2013, 07:51 AM Thread Starter
Senior Member
 
arkansasbowman's Avatar
 
Join Date: Jun 2009
Location: Arkansas
Posts: 163
Would like to just thank you again, Members do not have to help nor respond, I believe in saying thank you, for me it is important. The info above gets exactly what I needed, and agreed not into wild goose chases, so headed off to auto parts this morning NOW with great info

Tires Down!!!
2009 Vulcan 900 Custom
Mustang Day Tripper w/upgrade insert
Cobra Swept Exhaust
Kuryakyn ISO Grips with throttle boss and Stiletto Ends
Kuryakyn Stiletto footpegs front, ISO Wings Rear
Irate Flame grill and regulator cover
Xelement Saddlebags and Tool Bag
Aftermarket Flame Mirrors
Custom Speedo Dial (R.I.P. w/respect to the creator)
Adjure 7" Ventura Flame with Skull lens
Barron 2" lowering kit, GenMar 2" Risers
Cobra FI2000r 2-2-1
Thunder MFG Tornado Intake
arkansasbowman is offline  
Sponsored Links
Advertisement
 
Reply

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Correct bolt size for steering head fork clamp bolt aeroden Vulcan 1500 3 12-29-2014 03:34 AM
Front axle clamp bolt Nicolaos General Vulcan Talk 5 12-17-2014 11:11 PM
95 vulcan 800 tensioner cap bolt and spring vic677 Vulcan 800 1 10-22-2013 11:56 AM
VN800A Front Axle Pinch Bolt oldrockr Vulcan 800 2 08-26-2013 11:00 PM
Vulcan 900 cam chain tensioner body thread stripped SUZYGS1000 Vulcan 900 3 04-03-2012 12:44 PM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome