Vulcan 900 Rear Turn Signals - Kawasaki Vulcan Forum : Vulcan Forums
 
LinkBack Thread Tools Display Modes
post #1 of 5 (permalink) Old 02-18-2011, 01:09 PM Thread Starter
Member
 
mississippian's Avatar
 
Join Date: Feb 2011
Location: Columbus, Mississippi
Posts: 35
Vulcan 900 Rear Turn Signals

Does anyone know if the front turn signals can be fitted to the rear on the Vulcan 900? I would like to give the bike the additional running lights that the front offers.
mississippian is offline  
Sponsored Links
Advertisement
 
post #2 of 5 (permalink) Old 02-18-2011, 04:22 PM
Senior Member
 
MRSPOCK's Avatar
 
Join Date: Aug 2010
Location: NW Houston 'burbs
Posts: 109
I'm thinking of this Triple Wammy from Kuryakyn. It turns the rear turn signals into running lights and its plug and play, no splicing required (or so they say). You replace the stock yellow turn signal lenses with clear and clear bulbs with red. It's a little over $100, but in my view not to bad a deal as the kit includes everything you need and you don't have to add to or cut into the wiring.

http://www.kuryakyn.com/Products/731...rake-Light-Kit

'11 1700 Nomad Candy Neptune Blue/Metallic Phantom Silver
Bikes I've owned over the years:
2008 Vulcan 900 Custom
1980 Yamaha XS750 Special
1978 Honda CB400
1975 Honda SL125
Memories of what never was become the good old days....
MRSPOCK is offline  
post #3 of 5 (permalink) Old 02-18-2011, 10:10 PM
Lifetime Premium

 
Bob Myers's Avatar
 
Join Date: Oct 2009
Location: Richmond, Ky
Posts: 1,219
I found a set of fronts that came from a wrecked bike, housings were junk. I pulled the wiring out of them and swapped it into the rear housings, making them a 3 wire setup. I then extended the wires and covered with heat shrink tube, running them all the way back to the middle of the bike like the original 2 wires did. Clear lens on both ends, amber bulbs in front, red bulbs in rear. Including bulbs and lens', about $42.00

'98 800a w/aluminum wheels/tubeless tires
Iron Butt Ass.#34911


To view links or images in signatures your post count must be 1 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 1 or greater. You currently have 0 posts.
Bob Myers is offline  
 
post #4 of 5 (permalink) Old 02-19-2011, 06:32 AM
Senior Member
 
nlrider's Avatar
 
Join Date: Mar 2010
Posts: 179
I have the tripple whammy kit sitting on a shelf, waiting for the snow to melt so I can install it and start riding. It will be awhile before that happens. I will post how easy or difficult it is to install, although I believe it truly is plug and play which should take only a few minutes.

Life is a journey, enjoy the ride.
nlrider is offline  
post #5 of 5 (permalink) Old 02-19-2011, 06:52 PM Thread Starter
Member
 
mississippian's Avatar
 
Join Date: Feb 2011
Location: Columbus, Mississippi
Posts: 35
Thats what I needed to know. I will get me some lights and do the same. Thanks.
mississippian is offline  
Sponsored Links
Advertisement
 
Reply

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Retrofit LED Lamps for Existing Turn Signals- Turn Signals 101 rangemaster728 Vulcan 650 S 32 02-03-2018 04:12 PM
Rear Turn Signal Problem - Old Signals Work - Replacement Signals Don't merc Vulcan 500 9 06-17-2015 10:01 PM
Turn rear turn signals to running lights???? gibi Vulcan 900 18 05-19-2015 03:22 PM
Changing rear turn signals to run-brake-turn Blue Vulcan 900 5 04-01-2013 11:07 AM
Rear Turn Signal Connection Aftermarket Turn Signals dccatfan General Vulcan Talk 7 03-18-2012 05:04 PM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome