Vulcan 900 se backrest question - Kawasaki Vulcan Forum : Vulcan Forums
 
LinkBack Thread Tools Display Modes
post #1 of 5 (permalink) Old 08-31-2010, 02:29 PM Thread Starter
Senior Member
 
blakeh's Avatar
 
Join Date: Aug 2010
Posts: 123
Vulcan 900 se backrest question

I have an 09 custom se that i am accessorizing. I have ordered some universal passenger floorboards and the OEM highway bars. I have looked into the OEM passenger seat rest and its to expensive and not high enough. Now my question is if i buy on of the bay that is not made for the SE but for the 900 it will fit correct? I will just scratch up the chrome and paint it black my self.. Thanks for the help
blakeh is offline  
Sponsored Links
Advertisement
 
post #2 of 5 (permalink) Old 08-31-2010, 10:59 PM
Lifetime Premium
 
whiting57's Avatar
 
Join Date: Dec 2009
Location: Simcoe Ontario Canada
Posts: 3,670
Quote:
Originally Posted by blakeh View Post
I have an 09 custom se that i am accessorizing. I have ordered some universal passenger floorboards and the OEM highway bars. I have looked into the OEM passenger seat rest and its to expensive and not high enough. Now my question is if i buy on of the bay that is not made for the SE but for the 900 it will fit correct? I will just scratch up the chrome and paint it black my self.. Thanks for the help
I dont know if it will fit for sure, try the following ....
cheapcycleparts.com
meancycles.com
cruisercustomising.com

These guys sell aftermarket accessories at very resonable price, i have used all of them extensivly and are reliable, reputable suppliers, aftermarket seems to be much cheaper than OEM, plus if you call them their knowledge is topshelf.

Dont know where you live ... need to put your location next to your "Handle".
Hope these sites help

Maurice

As i flipped into 5th, i couldnt remember a damn thing she said
To view links or images in signatures your post count must be 1 or greater. You currently have 0 posts.


2009 Classic LT Bagger ... SOLD .... ... Batwing Fairing, Metzler 200 rear, Mutazu Hard Bags, Denray Hitch, Mustang Seat, Piggybacker Trailer. traded on a Versys 650 LT ... Loaded

2010 Custom [I] ... traded on a 2015 Ninja 650 Abs traded on a 2016 Versys 650 LT ... Loaded
whiting57 is offline  
post #3 of 5 (permalink) Old 09-01-2010, 12:13 AM
Top Contributor
 
V Twin's Avatar
 
Join Date: Jan 2010
Location: Dallas, TX
Posts: 711
Yes if it fits the VN 900 Classic or LT models then it fits the Custom models as well. Most parts fit all three models exept for windshields and some crash bars.


Gitty Up & Go!

2007 VN 900 Custom modifications:
Corbin Young Guns Saddle*OEM Classic Gel Flame Saddle (when 2up)*OEM Light Bar*National Cycles Shield*OEM Ribbed Handlebar Grips*OEM Classic Rear Fender*PC III*V&H SCS Pipes (Modified)*Comet Milled BAK*Engine Guard*Genmar Risers*Clear Alternatives Integrated Tail Light*Kury Magnum Plus Mirrors*Kury Cruise Control*Upgraded Horn*Metzler 90/90/21*Avon Venom 200/70/15*Both SW Pulleys.
V Twin is offline  
 
post #4 of 5 (permalink) Old 09-01-2010, 09:33 AM
Senior Member
 
lilduec's Avatar
 
Join Date: Aug 2010
Location: St Louis metro area
Posts: 111
You could just buy mine!!!
https://www.vulcanforums.com/forums/s...ad.php?t=10594

If not I would start looking on the swap meet areas on this forum, and on craigslist I've found some good deals on both!
lilduec is offline  
post #5 of 5 (permalink) Old 09-01-2010, 02:35 PM Thread Starter
Senior Member
 
blakeh's Avatar
 
Join Date: Aug 2010
Posts: 123
Quote:
Originally Posted by lilduec View Post
You could just buy mine!!!
https://www.vulcanforums.com/forums/s...ad.php?t=10594

If not I would start looking on the swap meet areas on this forum, and on craigslist I've found some good deals on both!
pm sent
blakeh is offline  
Sponsored Links
Advertisement
 
Reply

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
New (to me) 900 Custom SE and an exhaust question bulletsponge New Member Introductions 5 06-06-2014 10:20 AM
900 se question ~ ticking noise on front end durox Vulcan 900 28 06-28-2013 08:29 AM
Buying a 09 Vulcan 900 Custom SE (Question) 09Vulcan900SE Vulcan 900 16 08-09-2012 12:53 AM
MS SE 1600 Enginge guards and Backrest kb2112 Vulcan 1600 0 07-07-2012 01:05 PM
Differences between Classic SE and Custom SE TommyStarwind Vulcan 900 5 09-02-2011 08:50 PM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome