Turbo Kit, Muzzy Pipe, Cobra Pipe, Hard Chrome Pipes - Kawasaki Vulcan Forum : Vulcan Forums
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 15 (permalink) Old 11-15-2008, 12:16 AM Thread Starter
Junior Member
 
Join Date: Oct 2008
Location: California
Posts: 9
Turbo Kit, Muzzy Pipe, Cobra Pipe, Hard Chrome Pipes

I have a MR. Turbo, Turbo Kit for a Vulcan 1500. This can be adapted to fit a mean streak. This is a complete kit with blow through carburetor. The kit was put on for about 500 miles, then someone bought the bike and did not want the turbo. Complete kit. SOLD


I also have a Muzzy 2 into 1 pipe for a Vulcan 1500 or Mean streak. It is in great condition besides the very small scratch pictured. This scratch is not visible when the pipe is installed. SOLD


Cobra 2 into 1 pipe. Was designed for a Drifter but fits a Vulcan Classic. This pipe is Like new. Asking $200 OBO.

If anyone needs any additional information or pictures, please contact me at [email protected]

Thanks
Joe

Last edited by Stealth; 03-26-2010 at 04:11 AM.
Stealth is offline  
Sponsored Links
Advertisement
 
post #2 of 15 (permalink) Old 11-15-2008, 12:17 AM Thread Starter
Junior Member
 
Join Date: Oct 2008
Location: California
Posts: 9
The last set of pipes I have are Hard Chrome 3 inch slash cut exhausts. Fits Vulcan 1500. There is a scratch along the bottom of the lower pipe from dragging. This cannot be seen with the pipes installed. Only if you get under the bike to look. SOLD

Last edited by Stealth; 07-06-2009 at 10:31 PM.
Stealth is offline  
post #3 of 15 (permalink) Old 12-04-2008, 09:33 PM Thread Starter
Junior Member
 
Join Date: Oct 2008
Location: California
Posts: 9
Make me an offer. I need this stuff gone!
Stealth is offline  
 
post #4 of 15 (permalink) Old 12-05-2008, 10:27 AM
Member
 
RKR0923's Avatar
 
Join Date: Nov 2008
Location: Alabama
Year/Make/Model: 2006 Kawasaki 900 Classic LT
Displacement/CC's: 900
Color: Blue/Sliver
Gender: Male
Posts: 30
Garage
Would the Hard Chrome 3 inch slash cut exhausts work on 07 1600 SE?
RKR0923 is offline  
post #5 of 15 (permalink) Old 12-05-2008, 04:18 PM Thread Starter
Junior Member
 
Join Date: Oct 2008
Location: California
Posts: 9
RKR0923,

For a lot of pipes, it shows that they fit both the 1500 and 1600's. But I am not sure if these fit both models or not. If you are interested, let me know. I'll give them to you cheap.

Joe
Stealth is offline  
post #6 of 15 (permalink) Old 12-07-2008, 03:49 PM
Member
 
RKR0923's Avatar
 
Join Date: Nov 2008
Location: Alabama
Year/Make/Model: 2006 Kawasaki 900 Classic LT
Displacement/CC's: 900
Color: Blue/Sliver
Gender: Male
Posts: 30
Garage
Do you mean hardkrome on those pipes?
I can't find 3 inch slash cuts anywhere that says their not slip-ons.........those don't appear to be slip-ons?
RKR0923 is offline  
post #7 of 15 (permalink) Old 12-07-2008, 03:58 PM Thread Starter
Junior Member
 
Join Date: Oct 2008
Location: California
Posts: 9
Yes they are DG HardKrome full exhausts, not slipons. You probably wont find these because I bought them new back in 99 or 2000. I don't think they make this style anymore...
Stealth is offline  
post #8 of 15 (permalink) Old 01-09-2009, 02:55 AM Thread Starter
Junior Member
 
Join Date: Oct 2008
Location: California
Posts: 9
Everything is still available. All offers will be considered. Will sell cheap...
Stealth is offline  
post #9 of 15 (permalink) Old 01-09-2009, 10:39 PM
 
Join Date: Jan 2009
Posts: 2
Do you still have the kit?

Do you still have the kit? I have a 2002 mean streak and I'm bored with it. I went into Mr. Turbo and they don't sell the kit anymore. You said this could fit the mean streak. How about the fuel injection system. Would I have to change to carb? Thanks Pablo.
pano1967 is offline  
post #10 of 15 (permalink) Old 01-10-2009, 12:32 AM Thread Starter
Junior Member
 
Join Date: Oct 2008
Location: California
Posts: 9
Pablo,

I do still have the turbo kit. You should be able to make it work with the fuel injection. The best thing would be to contact Mr. Turbo. They are usually very helpful and would be able to tell you what exactly would be needed to use it on the fuel injection system. I think all that you would need would be a power commander or another piggyback system...
Stealth is offline  
Sponsored Links
Advertisement
 
Reply

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Viking Hard Mount Kit vs Willie and Max Hard Mount Kit Universal Fodder Vulcan 900 2 08-27-2018 12:19 AM
turbo honda mudster799 Other Motorcycles 0 02-03-2013 04:26 PM
Muzzy-Thunder 100in kit satyride New Member Introductions 0 11-12-2011 03:40 PM
Muzzy true-dual exhaust on VN-1500 Classic winstoncup Vulcan 1500 0 11-05-2010 03:15 PM
Muzzy Drag Pipes? Oh3Vulcan1600 Vulcan 1600 3 05-12-2010 09:58 PM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome