Wheel compatibilityhelp needed - Kawasaki Vulcan Forum : Vulcan Forums
LinkBack Thread Tools Display Modes
post #1 of 2 (permalink) Old 11-30-2017, 12:07 PM Thread Starter
Junior Member
Tek's Avatar
Join Date: Oct 2014
Location: San Jose, in the San Francisco Bay Area of California
Year/Make/Model: 2006/Kawasaki/Vulcan
Displacement/CC's: 900
Color: black
Gender: Male
Posts: 12
Let me preface this with I'm good enough with a wrench to do a motor swap it just don't know specifics and details. I know enough about a car to swap rims when it comes to width diameter and bolt patterns but I'm kind of lost when it comes to motorcycles. With the rotor mounting to the wheel I'm spacing inside the forks I just feel a little overwhelmed I would love some guidance.

I'm looking for a wheel compatibility chart for all years the Vulcan 900.

My ideal solution would be to put a front and back wheel off the blacked out custom 900.

I need to find out if it'll fit my 2006 Vulcan 900 classic.

Any assistance is appreciated have a wonderful holidays.
Tek is offline  
Sponsored Links
post #2 of 2 (permalink) Old 12-06-2017, 01:01 PM
Join Date: Dec 2017
Location: Lincoln, Rhode Island
Year/Make/Model: 2007 Vulcan Classic LT
Displacement/CC's: 900
Color: red/Silver
Gender: Male
Posts: 67
Send a message via Yahoo to Bildak
Everything depends on axle size. If the axles are the same size, then everything else may just fall into place. I did an axle and tire size change to my Concours. I used a front rim from a 2001 ZR-7 as the axle had the same diameter with a 17 inch tire as the 2004 Concours had with the 18 inch. The only thing I needed to do was swap the front rotors from the 2004 Concours to the ZR-7 wheel. Do a search for Kawasaki Vulcan axle sizes. They maybe all the same...
Bildak is offline  
Sponsored Links

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
Wheel Chock for Garage...Recommendations Needed ChrisHead Vulcan 650 S 18 08-16-2017 07:24 AM
needed: rear wheel 1500 classic 1996 model Rick King Vulcan 1500 0 06-29-2011 05:42 PM
non stock pulley needed for vn2000 VN2000-Eric Vulcan 2000 7 06-06-2009 11:37 PM
Mufflers needed for 01 800 Classic tomus Bikes For Sale 4 03-02-2009 05:55 PM
Help needed on how to store bikes for a long period... baktr Vulcan 1500 1 10-04-2008 01:49 AM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome