Service code info - Kawasaki Vulcan Forum : Vulcan Forums
 7Likes
  • 6 Post By bearslayer
  • 1 Post By TuttiPazzo
 
LinkBack Thread Tools Display Modes
post #1 of 4 (permalink) Old 01-22-2018, 10:24 PM Thread Starter
Lifetime Premium
 
bearslayer's Avatar
 
Join Date: Nov 2017
Location: Chocowinity NC
Year/Make/Model: 2004 Nomad , 1985 BMW K100 X2 , 1985 Intruder, 1998 Ducati Monster, 1972 CL350, 1948 Indian CZ125, 2
Displacement/CC's: 125 -1500
Color: Blue & Silver , Black , Gray , Maroon,black,
Gender: Male
Posts: 706
Garage
Cool Service code info

During my debacle of disconnecting my throttle position sensor I found the following info that may be useful


How To Read Service Codes:

Turn on ignition.
Push the upper meter button to display the odometer.
Push the upper meter button and left meter button for more than 2 seconds.
The service code is displayed on the LCD instead of odometer. Multiple codes will be displayed in a sequence with the interval of 2 seconds.
Turn on/turn off the ignition to return the display to the normal operation mode.

How To Erase Service Codes:

Turn on the ignition and start the engine.
Keep the idling more than 30 seconds.
Run the bike for more than 5 minutes at a speed of 25 mph or more.
Stop. Turn the ignition switch off.
Repeat the above procedures 3 times.

Service Codes:

11 Main throttle sensor malfunction, wiring open or short.
12 Intake air pressure sensor malfunction, wiring open or short.
13 Intake air temperature sensor malfunction, wiring open or short.
14 Water temperature sensor malfunction, wiring open or short.
21 Crankshaft sensor malfunction, wiring open or short
24 Rear wheel rotation sensor malfunction, wiring open or short.
25 Gear position sensor malfunction, wiring open or short.
31 Vehicle-down sensor malfunction, wiring open or short.
32 Sub throttle sensor malfunction, wiring open or short.
33 Oxygen sensor malfunction or Inactivate, wiring open or short.
39 ECU communication error
41 Fuel injector #1 malfunction, wiring open or short.
42 Fuel injector #2 malfunction, wiring open or short.
51 Stick coil #1 malfunction, wiring open or short.
52 Stick coil #2 malfunction, wiring open or short.
56 Radiator fan relay malfunction, wiring open or short.
62 Subthrottle valve actuator malfunction, wiring open or short.
64 Air switching valve malfunction, wiring open or short.
67 Oxygen sensor heater malfunction, wiring open or short.
94 Fuel supply system malfunction
3A Purge valve malfunction, wiring open or short (Equipped Models).
bearslayer is offline  
Sponsored Links
Advertisement
 
post #2 of 4 (permalink) Old 04-22-2018, 02:43 PM
Member
 
Join Date: Sep 2015
Year/Make/Model: 2015 Vulcan S ABS
Color: Black
Gender: Male
Posts: 82
Garage
Yeah. This did not work for me. Every time I press both buttons > 2 seconds I get the clock flashing. Yes, ODO is showing.
IndyTom likes this.

--
Chi male fa, male venne...
TuttiPazzo is offline  
post #3 of 4 (permalink) Old 04-22-2018, 10:17 PM
Top Contributor
 
IndyTom's Avatar
 
Join Date: Jul 2017
Location: Noblesville, Indiana USA
Year/Make/Model: 2016 Kawasaki Vulcan S Cafe ABS
Displacement/CC's: 650
Color: Matte Gray/Green
Gender: Male
Posts: 2,016
Quote:
Originally Posted by TuttiPazzo View Post
Yeah. This did not work for me. Every time I press both buttons > 2 seconds I get the clock flashing. Yes, ODO is showing.
Could it be because you don't have any Service Codes to display?
IndyTom is offline  
 
post #4 of 4 (permalink) Old 07-11-2018, 09:01 AM
Junior Member
 
Join Date: Jul 2018
Location: Brasilia, Brazil
Year/Make/Model: 2018 Vulcan 650 S
Displacement/CC's: 650
Color: Black Matte
Gender: Male
Posts: 2
After replaced vacuum rubber hose, service light goes on.

In my case, after road 3 times, I've repeat step to read service codes, and bang! Service light turn off.

thanks for share it tip!
Douglas Filipe is offline  
Sponsored Links
Advertisement
 
Reply

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Service code 62 metal_benji Vulcan 900 0 08-03-2018 12:37 AM
Paint Code for the VN900 Custom SE frame angliam Vulcan 900 40 05-27-2017 02:52 PM
Turn Signal Wiring (colour code) myvulcan08 Vulcan 900 2 01-02-2010 12:08 PM
Color Code Assistance rpeek2 Vulcan 900 5 10-12-2009 11:23 AM
Service after 600 mile service BluVulc09 Vulcan 900 6 06-23-2009 06:56 PM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome