Part number help!

[rbrownsb]

Hello, does anyone know this o-ring part number from the final drive of a '97 VN1500D?

The blow ups aren't much help, I replaced the leaking seal, but while I have it apart I want to replace this o-ring too as it's a little sloppy.

[winstoncup]

Hard to tell exactly, but try this link: http://www.bikebandit.com/houseofmot...49753#sch75819

Hope that helps...

[rbrownsb]

Yeah, I have that open, I replaced the 92049A seal, but can't seem to identify that o-ring in that blow-up.

[winstoncup]

Its not the 92055B part? that was what I was thinking, but no expert...

[rbrownsb]

That's what I was thinking/wondering, but the blow-up shows it larger than the 92049A seal, however in real life it is smaller, so I was hoping someone who may have replaced it before would see this thread, I want to know for sure before I go shopping.

[winstoncup]

I sent the pic to my local Kawa service guys who do my maintenance... will post any response...

[rbrownsb]

Thanks! I just got off the phone with one of my local dealers, even sent him the picture and he agreed that the blow-up does not do a good job with this o-ring, but he thinks its the 92055C in the blow up. Hopefully your guy will respond with the same, then I can order it. :-)

[SWVA_08V2k]

for $5 a piece I believe I would order both and if its not one then its the other and you can return it or just consider the extra $5 as a convince fee of not having to deal with the extra time in case you ordered the wrong one.

[winstoncup]

Just heard back from the shop I work with, he said it is part number: 92055-1556

Hope that helps if not too late... have a great long weekend all and thanks to all the Vets out here!

[rbrownsb]

Thanks WC, I went down Friday and picked up the 92055-1646, which is a different color, but fits, when I looked up ...-1556 as your guy suggested, it is superceded by the -1646, so it looks like I am good.
Thanks all! Now to find some time to start puttng this thing back together.