2011 1700 Classic exhaust mod - Kawasaki Vulcan Forum : Vulcan Forums
» Insurance
» Sponsors
Go Back   Kawasaki Vulcan Forum : Vulcan Forums > Motorcycle Models > Vulcan 1700

Reply
 
Thread Tools Display Modes
Old 11-01-2012, 10:00 PM   #1
USMCVulcan
Junior Member
 
Join Date: Sep 2012
Location: SoCal
Posts: 14
Default 2011 1700 Classic exhaust mod

So I decided to mod my 2011 1700 Classic stock exhaust. Took off the end caps and drilled 8 holes in each plate on the rear of the baffle that is about 6" inside the pipe. No real difference in sound level. I am thinking about trying to get the baffles out. Do I just use a hole saw to cut around the baffle pipe? I already cut the baffle pipe off flush with the plate 6" in so I can have clearance for the hole saw. Anything else I need to get ride of, or after I hit it with the hole saw do I just use a broom handle in the baffle pipe to break the welds free at the other end?

Sent from my LT28at using Motorcycle.com Free App
USMCVulcan is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 11-02-2012, 07:24 AM   #2
Vulcan Hammer
Senior Member
 
Vulcan Hammer's Avatar
 
Join Date: Nov 2011
Location: Ontario, Canada
Posts: 321
Default

Quote:
Originally Posted by USMCVulcan View Post
So I decided to mod my 2011 1700 Classic stock exhaust. Took off the end caps and drilled 8 holes in each plate on the rear of the baffle that is about 6" inside the pipe. No real difference in sound level. I am thinking about trying to get the baffles out. Do I just use a hole saw to cut around the baffle pipe? I already cut the baffle pipe off flush with the plate 6" in so I can have clearance for the hole saw. Anything else I need to get ride of, or after I hit it with the hole saw do I just use a broom handle in the baffle pipe to break the welds free at the other end?

Sent from my LT28at using Motorcycle.com Free App
If you have a Classic, then you may be treading on "virgin" ground.

Most with Classics who have attempted a muffler mod have simply drilled out the centre discs with a hole saw (approx. 1 1/4" dia.). There are 3 discs: One plate a few inches in from the end, another 8"-12" further in, and one plate near the front of the muffler (you have to remove them to access this plate).

If the baffles are anything like those on the Nomad/Voyager/Vaquero, they are very securely welded in place. They don't come out easily with the "hole saw and broom handle technique" that works on the 1600s.
Vulcan Hammer is offline   Reply With Quote
Old 11-02-2012, 11:19 AM   #3
USMCVulcan
Junior Member
 
Join Date: Sep 2012
Location: SoCal
Posts: 14
Default

Quote:
Originally Posted by Vulcan Hammer View Post
If you have a Classic, then you may be treading on "virgin" ground.

Most with Classics who have attempted a muffler mod have simply drilled out the centre discs with a hole saw (approx. 1 1/4" dia.). There are 3 discs: One plate a few inches in from the end, another 8"-12" further in, and one plate near the front of the muffler (you have to remove them to access this plate).

If the baffles are anything like those on the Nomad/Voyager/Vaquero, they are very securely welded in place. They don't come out easily with the "hole saw and broom handle technique" that works on the 1600s.
The center disc you are refering to...is that the "plate" inside the small baffle pipe? I haven't tried to get that one out yet. I may be in over my head, and might just run it like it is for now after taking that plate out while I save up some cash for aftermarket pipes. I guess I am not sure how I would cut the plates deeper in...
USMCVulcan is offline   Reply With Quote
Old 11-02-2012, 12:28 PM   #4
Vulcan Hammer
Senior Member
 
Vulcan Hammer's Avatar
 
Join Date: Nov 2011
Location: Ontario, Canada
Posts: 321
Default

Quote:
Originally Posted by USMCVulcan View Post
The center disc you are refering to...is that the "plate" inside the small baffle pipe? I haven't tried to get that one out yet. I may be in over my head, and might just run it like it is for now after taking that plate out while I save up some cash for aftermarket pipes. I guess I am not sure how I would cut the plates deeper in...
Yes, Drilling out the centre discs inside the baffle tube is the easiest approach with the Classic. Cosmetically and from a "sound" perspective, it is probably the most effective way to "debaffle" a Classic. It saves all the messy premliminary cutting that you have already done...sorry.

You would need a bi-metal hole saw approx. 1-1/4" diameter on an extension rod (both available from any large hardware or building supply store).
Vulcan Hammer is offline   Reply With Quote
Old 11-02-2012, 01:13 PM   #5
USMCVulcan
Junior Member
 
Join Date: Sep 2012
Location: SoCal
Posts: 14
Default

Quote:
Originally Posted by Vulcan Hammer View Post
Yes, Drilling out the centre discs inside the baffle tube is the easiest approach with the Classic. Cosmetically and from a "sound" perspective, it is probably the most effective way to "debaffle" a Classic. It saves all the messy premliminary cutting that you have already done...sorry.

You would need a bi-metal hole saw approx. 1-1/4" diameter on an extension rod (both available from any large hardware or building supply store).
Thanks. I skipped drilling out the center disc first because I read somewhere that it didn't have much of an effect. I will try that tonight. I have also read that some have put something inside the baffle pipe and hit it with a BFH to knock it out...may only be on the 900 (I believe they have just a screen). Drilling the 8 holes in each end cap gave me a little deeper tone, but to me doesn't sound any louder. A buddy at work told me he heard me pull up and he thought it sounded louder. Maybe drilling out the cebter disc will give me that little bit of extra volume I am looking for.

Last edited by USMCVulcan; 11-02-2012 at 02:26 PM.
USMCVulcan is offline   Reply With Quote
Old 11-02-2012, 03:34 PM   #6
Vulcan Hammer
Senior Member
 
Vulcan Hammer's Avatar
 
Join Date: Nov 2011
Location: Ontario, Canada
Posts: 321
Default

Drilling out the discs gets more volume, progressively as you remove each subsequent disc.
But some have said you lose the distinctive power pulses...ending up with just more volume.

I have left my Classic LT mufflers stock, and after 5,000 miles they seem louder and deeper.
Vulcan Hammer is offline   Reply With Quote
Old 11-02-2012, 04:05 PM   #7
USMCVulcan
Junior Member
 
Join Date: Sep 2012
Location: SoCal
Posts: 14
Default

I was going to leave everything stock until I save up some coin for aftermarkets...maybe after the Marine Corps Ball and the holidays. But I figured I would give it a try. Worst thing that could happen is I destroy the stock pipes and use that as an reason to beg the wife for replacements....improvise, adapt and overcome!!!!
USMCVulcan is offline   Reply With Quote
Old 11-02-2012, 07:09 PM   #8
USMCVulcan
Junior Member
 
Join Date: Sep 2012
Location: SoCal
Posts: 14
Default

Cut out the first disc about 5-6" inside the baffle pipe...a little louder maybe. I can't get to the next one in about 12"'s...don't have an extentiin to fit my hole saw. Just not sure if going any further would be worth it. Still has the thump. I may take it for a test ride and go from there.

Sent from my LT28at using Motorcycle.com Free App
USMCVulcan is offline   Reply With Quote
Old 11-03-2012, 01:34 AM   #9
Damo222
Member
 
Damo222's Avatar
 
Join Date: Feb 2012
Location: Mt Druitt, Sydney, Australia
Posts: 51
Default

Mate its worth it, biiiig difference on my Nomad. Also take off the mufflers and take out the baffles on the engine side, should be one in each pipe on that side.
Not sure about you guys over there but in Aussie we have a CATALYTIC CONVERTER in each pipe, (honeycomb type material). I left them in.
Sounds great without being over the top loud and improved the performance.
As was said elswhere , LET THEM BREATHE.
Damo222 is offline   Reply With Quote
Sponsored Links
Advertisement
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Powered by vBadvanced CMPS v3.2.2

All times are GMT -5. The time now is 02:08 AM.


Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Garage Plus vBulletin Plugins by Drive Thru Online, Inc.
Motorcycle News, Videos and Reviews
Honda Grom Forum Harley Davidson Forum Honda 600RR Kawasaki Forum Yamaha R6 Forum Yamaha FZ-09 Forum
1199 Panigale Forum Roadglide Forum Honda CBR1000 Forum Vulcan Forum Yamaha R1 Forum Yamaha R3 Forum
Ducati Monster Forum Harley Forums Honda CBR250R Forum ZX10R Forum Star Raider Forum Yamaha Viking Forum
Suzuki GSXR Forum V-Rod Forums Honda Shadow Forum Kawasaki Motorcycle Forum Star Warrior Forum KTM Duke 390 Forum
SV650 Forum BMW S1000RR Forum Honda Fury Forum Kawasaki Versys Forum Drag Racing Forum Ducati 899 Panigale Forum
Suzuki V-Strom BMW K1600 Triumph Forum Victory Forums Sportbikes BMW NineT Forum
Volusia Forum BMW F800 Forum Triumph 675 Forum MV Agusta Forum HD Street Forum Suzuki GW250 Forum
Yamaha Motorcycles Victory Gunner Forum Honda Vultus Forum HD LiveWire Forum