Kawasaki Vulcan Forum banner

Question big air kit

2K views 4 replies 3 participants last post by  Lunatic 
#1 ·
I am thinking about buying the baron big air kit my question is if I get it do I have to get it on a dyno?
 
#2 ·
If your exhaust is still stock, then you won't have to. It's only when you change both stock air cleaner and exhaust that you have to add a fuel processor.
No need for a dyno if its just the air cleaner.
 
#3 ·
I do have Cobra pipes and a cobra processor so I should be all set or will it need to be adjusted?
 
#4 ·
Hey Rob. Here's a link to Gadgets page where it's a start for the settings for your bike.
I'm almost finished fitting up the Chucksters air cleaner and fitting a TFI processor to my bike then it's using those base settings on this page, then some minor adjustments as I've fitted an O2 sensor to the rear pipe so as I can get the fuel mixtures right.

http://www.gadgetjq.com/tfi.htm
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top