Vaquero, Wrapping Pipes

[Lunatic]

Thanks again for all the tips. I was personally going to just stop by the local auto parts store for the supplies to do this. Any reason -not- to?

[cruiser900]

I used "inferno heat wrap" from Heatshield Products on EBay. Don't skimp on quality. I used 1 inch as you can get a tighter radius and overlap. My two pipes took nearly 100 feet and they are double wrapped.

[Lunatic]

Originally Posted by cruiser900

I used "inferno heat wrap" from Heatshield Products on EBay. Don't skimp on quality. I used 1 inch as you can get a tighter radius and overlap. My two pipes took nearly 100 feet and they are double wrapped.

Hmm. I agree, quality is important. Off to Ebay I go.

[davidsheek]

Originally Posted by Lunatic

Thanks again for all the tips. I was personally going to just stop by the local auto parts store for the supplies to do this. Any reason -not- to?

Not really, there's just different types too choose from. The auto parts will probably be $50 for the same 50ft.

[element80]

from lava wrap instructions
6. It is important to start on side closest to exhaust port (closest to engine), wrapping down the system
towards the exhaust tip.
7. Make an initial wrap around the pipe and secure end with Thermal-Tie™ (Figure 4) or hose clamp.
8. After securing end, continue to wrap around pipe, using ¼” overlap with each pass (Figure 2) and
keeping tension on the exhaust wrap.

[IL Vaquero]

Hey Trey,
Hows it going man haven't heard from you in a while. I haven't been on here in a while hows the bike work for you. Mine is back at dealer getting the cruise fixed. And Im getting screwed by the dealer as usual I will pm you and tell myou all about it. two weeks to change the right switch housing calls for.8 hours labor told me had to take faring off to wire in the switch. Called another dealer they lafed said dont have to take faring off to change housing. Man they hate working on my bike so it will be the last time glad you got your pipe wraped realy helped my bike. And cut down on lifter and valve noise got the air leak fixed right and put the pcv/ign on. Now I want to take to so guys named two brs custom exhaust to get the cross over cut and made into true duels. Hope it sounds better but got to get it redynoed. My e-mail is bskz4@frontier.com lets talk some time sound good. B Cope.